12.4.4 Packet Tracer – Use FTP Services Answers

Last Updated on February 9, 2021 by Admin

12.4.4 Packet Tracer – Use FTP Services Answers

Packet Tracer – Use FTP Services (Answers Version)

Answers Note: Red font color or gray highlights indicate text that appears in the Answers copy only.

Addressing Table

Device

Interface

IP Address

Subnet Mask

FTP Server (ftp.pka)

NIC

209.165.200.226

255.255.255.224

 

Objectives

  • Upload a file to an FTP server.
  • Download a file from an FTP server.

Background / Scenario

File Transfer Protocol (FTP) is a commonly used application to transfer files between clients and servers on the network. The server is configured to run the service where clients connect, login, and transfer files. FTP uses port 21 as the server command port to create the connection. FTP then uses port 20 for data transfer.

In this activity, you will upload a file to an FTP server. You will also download a file from an FTP server.

Instructions

Part 1:  Upload a file to an FTP server.

In this part, you will locate the file sampleFile.txt and upload it to an FTP server.

Step 1:  Locate the file.

  1. Click PC-A.
  2. Click Desktop.
  3. Click Command Prompt.
  4. At the prompt, click ? to list the available commands.
  5. Enter dir to see the files on the PC. Notice that there is a sampleFile.txt file in the C:\ directory.

C:\> dir

Volume in drive C has no label.

Volume Serial Number is 5E12-4AF3

Directory of C:\

 

12/31/1969 17:0 PM 26 sampleFile.txt

26 bytes 1 File(s)

Step 2:  Connect to the FTP server.

  1. FTP to the FTP server at 209.165.200.226 or ftp.pka.

C:\> ftp 209.165.200.226

Trying to connect…209.165.200.226

Connected to 209.165.200.226

  1. Enter the username student and password class to gain access.

220- Welcome to PT Ftp server

Username:student

331- Username ok, need password

Password:

230- Logged in

(passive mode On)

Step 3:  Upload a file to an FTP server.

  1. Enter ? to see the commands available in the ftp client.

ftp> ?

         ?

         cd

         delete

         dir

         get

         help

         passive

         put

         pwd

         quit

         rename

ftp>

  1. Enter dir to see the files available on the server.

ftp> dir

 

Listing /ftp directory from 192.168.1.3:

0 : asa842-k8.bin 5571584

1 : asa923-k8.bin 30468096

2 : c1841-advipservicesk9-mz.124-15.T1.bin 33591768

3 : c1841-ipbase-mz.123-14.T7.bin 13832032

<output omitted>

  1. Enter put sampleFile.txt to send the file to the server.

ftp> put sampleFile.txt

 

Writing file sampleFile.txt to 209.165.200.226:

File transfer in progress…

 

[Transfer complete – 26 bytes]

 

26 bytes copied in 0.08 secs (325 bytes/sec)

ftp>

  1. Use the dir command again to list the contents of the FTP server to verify that the file has been uploaded to the FTP server.

Part 2:  Download a file from an FTP server.

You can also download a file from an FTP server. In this part, you will rename the file sampleFile.txt and download it from the FTP server.

Step 1:  Rename the file on an FTP server.

  1. At the ftp> prompt, rename the file sampleFile.txt to sampleFile_FTP.txt.

ftp> rename sampleFile.txt sampleFile_FTP.txt

 

Renaming sampleFile.txt

ftp>

[OK Renamed file successfully from sampleFile.txt to sampleFile_FTP.txt]

ftp>

  1. At the ftp> prompt, enter dir to verify the file has been renamed.

Step 2:  Download the file from the FTP server.

  1. Enter the command get sampleFile_FTP.txt to retrieve the file from the server.

ftp> get sampleFile_FTP.txt

 

Reading file sampleFile_FTP.txt from 209.165.200.226:

File transfer in progress…

 

[Transfer complete – 26 bytes]

 

26 bytes copied in 0.013 secs (2000 bytes/sec)

ftp>

  1. Enter quit to exit the FTP client when finished.
  2. Display the contents of the directory on the PC again to see the image file from the FTP server.

Step 3:  Delete the file from the FTP server.

  1. Log into the FTP server again to delete the file sampleFile_FTP.txt.
  2. Enter the command to delete the file sampleFile_FTP.txt from the server.

Question:

What command did you use to remove the file from the FTP server?

Type your answers here.

ftp> delete sampleFile_FTP.txt

  1. Enter quit to exit the FTP client when finished.
5 1 vote
Article Rating
Subscribe
Notify of
guest
0 Comments
Inline Feedbacks
View all comments