7.4.8 Lab – Use Ansible to Automate Installing a Web Server Answers

Last Updated on February 27, 2021 by Admin

7.4.8 Lab – Use Ansible to Automate Installing a Web Server Answers

Lab – Use Ansible to Automate Installing a Web Server (Answers Version)

Answers Note: Red font color or gray highlights indicate text that appears in the Answers copy only.

Objectives

Part 1: Launch the DEVASC and CSR1000v VMs

Part 2: Configure Ansible

Part 3 Verify Communications with the Local Webserver

Part 4: Create Ansible Playbooks to Automate Webserver Installation

Part 5: Add Options to Your Ansible Playbook for Apache Web Servers

Background / Scenario

In this lab, you will first configure Ansible so that it can communicate with a webserver application. You will then create a playbook that will automate the process of installing Apache on the webserver. You will also create a customized playbook that installs Apache with specific instructions.

Required Resources

  • 1 PC with operating system of your choice
  • Virtual Box or VMWare
  • DEVASC Virtual Machine

Instructions

Part 1:Launch the DEVASC and CSR1000v VMs

If you have not already completed the Lab Install the DEVASC-LAB, do so now. If you have already completed that lab, launch the DEVASC VM now.

Part 2:Configure Ansible

The DEVASC VM comes preinstalled with a number of dummy IPv4 addresses you can use for various scenarios and simulations. In this Part, you will configure Ansible to use one of the dummy IPv4 address for a local webserver.

Step 1:Open a terminal in the DEVASC-LABVM.

Step 2:Enable the SSH server.

The SSH server is disabled in the DEVASC-LABVM, along with other services that are typically not required. Start it with the following command.

[email protected]labvm:~$ sudo systemctl start ssh

[email protected]labvm:~$

Note: The SSH server and sshpass utility have already been installed in your VM. For your reference, these are installed using the following commands:

Install SSH

[email protected]labvm:~$ sudo apt-get install openssh-server

Install sshpass

[email protected]labvm:~$ sudo apt-get install sshpass

Step 3:Open the ansible directory in VS Code.

  1. Open VS Code.
  2. Click File > Open Folder… and navigate to the /labs/devnet-src/ansible folder.
  3. Click OK.
  4. The two subdirectories for the Ansible labs are now loaded in the VS Code EXPLORER pane for your convenience. In this lab, you will work with the ansible-apache directory.

Step 4:Edit the Ansible inventory file

  1. Open the hosts file in the ansible-apache directory.
  2. Add the following lines to the hosts file and save.

[webservers]

192.0.2.3 ansible_ssh_user=devasc ansible_ssh_pass=Cisco123!

  1. The credentials devasc and Cisco123! are admin credentials for the DEVASC VM. The IPv4 address you will use for this lab is 192.0.2.3. This is a static IPv4 address on the VM under the dummy0 interface, as shown in the output for the ip addr command.

[email protected]labvm:~/labs/devnet-src/ansible$ ip addr

1: lo: <LOOPBACK,UP,LOWER_UP> mtu 65536 qdisc noqueue state UNKNOWN group default qlen 1000

link/loopback 00:00:00:00:00:00 brd 00:00:00:00:00:00

inet 127.0.0.1/8 scope host lo

valid_lft forever preferred_lft forever

inet6 ::1/128 scope host

valid_lft forever preferred_lft forever

2: enp0s3: <BROADCAST,MULTICAST,UP,LOWER_UP> mtu 1500 qdisc fq_codel state UP group default qlen 1000

link/ether 08:00:27:97:ae:11 brd ff:ff:ff:ff:ff:ff

inet 10.0.2.15/24 brd 10.0.2.255 scope global dynamic enp0s3

valid_lft 45882sec preferred_lft 45882sec

inet6 fe80::a00:27ff:fe97:ae11/64 scope link

valid_lft forever preferred_lft forever

3: dummy0: <BROADCAST,NOARP,UP,LOWER_UP> mtu 1500 qdisc noqueue state UNKNOWN group default qlen 1000

link/ether a6:44:a7:e8:6a:9e brd ff:ff:ff:ff:ff:ff

inet 192.0.2.1/32 scope global dummy0

valid_lft forever preferred_lft forever

inet 192.0.2.2/32 scope global dummy0

valid_lft forever preferred_lft forever

inet 192.0.2.3/32 scope global dummy0

valid_lft forever preferred_lft forever

inet 192.0.2.4/32 scope global dummy0

valid_lft forever preferred_lft forever

inet 192.0.2.5/32 scope global dummy0

valid_lft forever preferred_lft forever

inet6 fe80::a444:a7ff:fee8:6a9e/64 scope link

valid_lft forever preferred_lft forever

[email protected]labvm:~/labs/devnet-src/ansible$

Step 5:Edit the ansible.cfg file.

  1. In the ansible-apache subdirectory, Open the ansible.cfg.
  2. You can remove the comment. Add the following lines to the file and save it. The ansible.cfg file tells Ansible where to find the inventory file and sets certain default parameters.

[defaults]

# Use local hosts file in this folder

inventory=./hosts

# Don’t worry about RSA Fingerprints

host_key_checking = False

# Do not create retry files

retry_files_enabled = False

Part 3:Verify Communications with the Local Webserver

In this Part, you will verify that Ansible can send commands to the local webserver.

Step 1:Use the ping module to verify that Ansible can ping the webserver.

Use the Ansible ping module to verify communications with the devices listed within the webservers group of your hosts inventory file.

[email protected]labvm:~/labs/ansible/ansible-apache$ ansible webservers -m ping

192.0.2.3 | SUCCESS => {

ansible_facts“: {

discovered_interpreter_python“: “/usr/bin/python3″

},

“changed”: false,

“ping”: “pong

}

[email protected]labvm:~/labs/ansible/ansible-apache$

If multiple devices were listed under the webservers group in your hosts inventory file, the output would indicate similar information for each device.

Step 2:Use the command module to verify Ansible can communicate with the webserver.

Use the Ansible command module to verify communications with the devices listed within the webservers group of your hosts inventory file. In this example you send the argument a “/bin/echo hello world” to ask the local webserver to respond with “hello world”.

[email protected]labvm:~/labs/ansible/ansible-apache$ ansible webservers -m command -a “/bin/echo hello world”

192.0.2.3 | CHANGED | rc=0 >>

hello world

[email protected]labvm:~/labs/ansible/ansible-apache$

Part 4:Create Ansible Playbooks to Automate Webserver Installation

In this Part, you will create two Ansible playbooks. The first playbook will automate the echo test you did in the previous Part. Imagine you are bringing a hundred webservers online. The [webserver] group in the hosts file would list all the necessary information for each webserver. You can then use a simple playbook to verify communications with all of them with one command. The second playbook you will create will automate the installation of Apache webserver software.

Step 1:Create your Ansible playbook to test your webserver group.

In this step you will create an Ansible playbook to perform the same echo command.

  1. In VS Code, create a new file in the ansible-apache directory with the following name:

test_apache_playbook.yaml

  1. Add the following information to the file. Make sure you use the proper YAML indentation. Every space and dash is significant. You may lose some formatting if you copy and paste.

hosts: webservers

tasks:

name: run echo command

command: /bin/echo hello world

Step 2:Run the Ansibl playbook to test your webserver group.

Run the Ansible playbook using the ansible-playbook command using the -v verbose option. You should see output similar to the following.

[email protected]labvm:~/labs/ansible/ansible-apache$ ansible-playbook -v test_apache_playbook.yaml

Using /home/devasc/labs/ansible/ansible-apache/ansible.cfg as config file

PLAY [webservers] **************************************************************

TASK [Gathering Facts] *********************************************************

ok: [192.0.2.3]

TASK [run echo command] ********************************************************

changed: [192.0.2.3] => {“changed”: true, cmd“: [“/bin/echo”, “hello”, “world”], “delta”: “0:00:00.002062”, “end”: “2020-05-20 21:35:32.346595″, rc“: 0, “start”: “2020-05-20 21:35:32.344533″, “stderr”: “”, stderr_lines“: [], stdout“: “hello world”, stdout_lines“: [“hello world”]}

PLAY RECAP *********************************************************************

192.0.2.3: ok=2changed=1unreachable=0failed=0skipped=0rescued=0ignored=0

[email protected]labvm:~/labs/ansible/ansible-apache$

Step 3:Create your Ansible playbook to install Apache.

  1. In VS Code, create a new file in the ansible-apache directory with the following name:

install_apache_playbook.yaml

  1. Add the following information to the file. Make sure you use the proper YAML indentation. Every space and dash is significant. You may lose some formatting if you copy and paste. The highlighted text is explained in the next step.

hosts: webservers

become: yes

tasks:

name: INSTALL APACHE2

apt: name=apache2 update_cache=yes state=latest

name: ENABLED MOD_REWRITE

apache2_module: name=rewrite state=present

notify:

RESTART APACHE2

handlers:

name: RESTART APACHE2

service: name=apache2 state=restarted

Step 4:Examine your Ansible playbook.

The following is an explanation of some of the significant lines in your playbook:

  • hosts: webservers This references the webservers group of devices in your hosts inventory file. This playbook will be run for all the devices with this group.
  • become: yesThe become keyword activates sudo command execution, which will allow tasks such as installing applications.
  • apt:The apt module is used to manage packages and application installations on Linux.
  • handlers:Handlers are similar to a task but are not run automatically. They are called by a task. Notice that the task ENABLED MOD_REWRITE calls the handler RESTART APACHE2.

Step 5:Run the Ansible backup to install Apache.

Run the Ansible playbook using the ansible-playbook command using the -v verbose option. The first time Apache installed on your VM, the task INSTALL APACHE2 will take anywhere from 30 seconds to a few minutes depending on your internet speed.

[email protected]labvm:~/labs/ansible/ansible-apache$ ansible-playbook -v install_apache_playbook.yaml

Using /home/devasc/labs/ansible/ansible-apache/ansible.cfg as config file

PLAY [webservers] **************************************************************

TASK [Gathering Facts] *********************************************************

ok: [192.0.2.3]

TASK [INSTALL APACHE2] *********************************************************

ok: [192.0.2.3] => {“cache_update_time“: 1590010855, cache_updated“: true, “changed”: false}

TASK [ENABLED MOD_REWRITE] *****************************************************

ok: [192.0.2.3] => {“changed”: false, “result”: “Module rewrite enabled”}

PLAY RECAP *********************************************************************

192.0.2.3 : ok=3changed=0unreachable=0failed=0skipped=0rescued=0ignored=0

=

[email protected]labvm:~/labs/ansible/ansible-apache$

The PLAY RECAP should display ok and failed=0 indicating a successful playbook execution.

Step 6:Verify Apache has been installed.

  1. Use the following command to verify that Apache is now installed. Press “q” to quit.

[email protected]labvm:~/labs/ansible/ansible-apache$ sudo systemctl status apache2

apache2.service The Apache HTTP Server

Loaded: loaded (/lib/systemd/system/apache2.service; enabled; vendor prese>

Active: active (running) since Wed 2020-05-20 03:48:49 UTC; 10min ago

Docs: https://httpd.apache.org/docs/2.4/

Process: 8201 ExecStart=/usr/sbin/apachectl start (code=exited, status=0/SU>

Main PID: 8225 (apache2)

Tasks: 55 (limit: 4654)

Memory: 5.3M

CGroup: /system.slice/apache2.service

├─8225 /usr/sbin/apache2 -k start

├─8229 /usr/sbin/apache2 -k start

└─8230 /usr/sbin/apache2 -k start

[email protected]labvm:~/labs/ansible/ansible-apache$

  1. Open the Chromium web browser and enter the IPv4 address for your new server, 192.0.2.3, to see the default Apache2 web page.

Part 5:Add Options to Your Ansible Playbook for Apache Web Servers

In a production environment, the Apache2 default installation is typically customized for the specific features needed by the organization. An Ansible playbook can help automate these configuration tasks, as well. In this part, you will customize your playbook by specifying that the Apache server use a different port number.

Step 1:Create your Ansible playbook for installing Apache.

  1. In VS Code, create a new file in the ansible-apache directory with the following name:

install_apache_options_playbook.yaml

  1. Add the following information to the file. Make sure you use the proper YAML indentation. Every space and dash is significant. You may lose some formatting if you copy and paste.

hosts: webservers

become: yes

tasks:

name: INSTALL APACHE2

apt: name=apache2 update_cache=yes state=latest

name: ENABLED MOD_REWRITE

apache2_module: name=rewrite state=present

notify:

RESTART APACHE2

name: APACHE2 LISTEN ON PORT 8081

lineinfile: dest=/etc/apache2/ports.conf regexp=”^Listen 80 line=”Listen 8081 state=present

notify:

RESTART APACHE2

name: APACHE2 VIRTUALHOST ON PORT 8081

lineinfile: dest=/etc/apache2/sites-available/000-default.conf regexp=”^<VirtualHost \*:80>” line=”<VirtualHost *:8081>” state=present

notify:

RESTART APACHE2

handlers:

name: RESTART APACHE2

service: name=apache2 state=restarted

This playlist is very similar to the previous one with the addition of two tasks that have the webservers listen on port 8081 instead of port 80.

The lineinfile module is used to replace existing lines in the /etc/apache2/ports.conf and /etc/apache2/sitesavailable/000-default.conf files. You can search the Ansible documentation for more information on the lineinfile module.

Step 2:Examine the two files that will be modified by the playbook.

Display the files /etc/apache2/ports.conf and /etc/apache2/sites-available/000-default.conf. Notice the webserver is currently listening on port 80.

[email protected]labvm:~/labs/ansible/ansible-apache$ cat /etc/apache2/ports.conf

# If you just change the port or add more ports here, you will likely also

# have to change the VirtualHost statement in

# /etc/apache2/sites-enabled/000-default.conf

Listen 80

<IfModule ssl_module>

Listen 443

<output omitted>

[email protected]labvm:~/labs/ansible/ansible-apache$ cat /etc/apache2/sites-available/000-default.conf

<VirtualHost *:80>

# The ServerName directive sets the request scheme, hostname and port that

# the server uses to identify itself. This is used when creating

# redirection URLs. In the context of virtual hosts, the ServerName

<output omitted>

[email protected]labvm:~/labs/ansible/ansible-apache$

Step 3:Run the Ansible Playbook.

  1. Run the Ansible playbook using the ansible-playbook command.

[email protected]labvm:~/labs/ansible/ansible-apache$ ansible-playbook install_apache_options_playbook.yaml

PLAY [webservers] **************************************************************

TASK [Gathering Facts] *********************************************************

ok: [192.0.2.3]

TASK [INSTALL APACHE2] *********************************************************

ok: [192.0.2.3]

TASK [ENABLED MOD_REWRITE] *****************************************************

ok: [192.0.2.3]

TASK [APACHE2 LISTEN ON PORT 8081] *********************************************

ok: [192.0.2.3]

TASK [APACHE2 VIRTUALHOST ON PORT 8081] ****************************************

ok: [192.0.2.3]

PLAY RECAP *********************************************************************

192.0.2.3: ok=5changed=0unreachable=0failed=0skipped=0rescued=0ignored=0

[email protected]labvm:~/labs/ansible/ansible-apache$

Step 4:Verify that Apache has been installed.

  1. View the files /etc/apache2/ports.conf and /etc/apache2/sites-available/000-default.conf again. Notice that the playbook modified these files to listen on port 8081.

[email protected]labvm:~/labs/ansible/ansible-apache$ cat /etc/apache2/ports.conf

# If you just change the port or add more ports here, you will likely also

# have to change the VirtualHost statement in

# /etc/apache2/sites-enabled/000-default.conf

Listen 8081

<IfModule ssl_module>

Listen 443

</IfModule>

<IfModule mod_gnutls.c>

Listen 443

</IfModule>

# vim: syntax=apache ts=4 sw=4 sts=4 sr noet

[email protected]labvm:~/labs/ansible/ansible-apache$

[email protected]labvm:~/labs/ansible/ansible-apache$ cat /etc/apache2/sites-available/000-default.conf

<VirtualHost *:8081>

# The ServerName directive sets the request scheme, hostname and port that

# the server uses to identify itself. This is used when creating

# redirection URLs. In the context of virtual hosts, the ServerName

<output omitted>

[email protected]labvm:~/labs/ansible/ansible-apache$

  1. Open the Chromium web browser and enter the IPv4 address for your new server. But this time specify 8081 as the port number, 192.0.2.3:8081, to see the default Apache2 web page.

Note: Although you can see in the ports.conf file that Apache2 is also listening on port 443, this is for secure HTTP. You have not yet configured Apache2 for secure access. This, of course, would be added to your Ansible playbook, but is beyond the scope of this course.

0 0 votes
Article Rating
Subscribe
Notify of
guest
0 Comments
Inline Feedbacks
View all comments