A technician is adding a new PC to a LAN. After unpacking the components and making all the connections, the technician starts the PC. After the OS loads, the technician opens a browser, and verifies that the PC can reach the Internet. Why was the PC able to connect to the network with no additional configuration?

  • Post author:
  • Post category:Uncategorized
  • Post comments:0 Comments
  • Post last modified:January 12, 2019
  • Reading time:2 mins read

Last Updated on January 12, 2019 by InfraExam

A technician is adding a new PC to a LAN. After unpacking the components and making all the connections, the technician starts the PC. After the OS loads, the technician opens a browser, and verifies that the PC can reach the Internet. Why was the PC able to connect to the network with no additional configuration?

  • The PC does not require any additional information to function on the network.
  • The PC came preconfigured with IP addressing information from the factory.
  • The PC was preconfigured to use DHCP.
  • The PC used DNS to automatically receive IP addressing information from a server.
  • The PC virtual interface is compatible with any network.
    Explanation:The new PC was preconfigured to use DHCP. When the PC is connected to a network that uses DHCP, it gets the IP address settings from the DHCP server that will allow it to function on the network. All devices require at least an IP address and subnet mask to function on a LAN. DNS does not automatically configure addresses on hosts. PC virtual interfaces are not universally compatible with LANs and do not necessarily provide a host with an IP address. At this place in the course, virtual interfaces are used on network switches.

For All Questions: ITN Chapter 2 Exam Answers 2019

0 0 votes
Article Rating
Subscribe
Notify of
guest
0 Comments
Inline Feedbacks
View all comments