What would be a reason for a computer user to use the Task Manager Performance tab?
What would be a reason for a computer user to use the Task Manager Performance tab? to increase the performance of the CPU to view the services that are currently…
What would be a reason for a computer user to use the Task Manager Performance tab? to increase the performance of the CPU to view the services that are currently…
What are two advantages of the NTFS file system compared with FAT32? (Choose two.) NTFS provides more security features. NTFS allows the automatic detection of bad sectors. NTFS supports larger…
A host is transmitting a multicast. Which host or hosts will receive it? a specially defined group of hosts one specific host all hosts with the same IP address the…
A host is transmitting a unicast. Which host or hosts will receive it? one specific host a specially defined group of hosts all hosts on the Internet the closest neighbor…
A host is transmitting a broadcast. Which host or hosts will receive it? all hosts in the same subnet a specially defined group of hosts the closest neighbor on the…
Which protocol supports Stateless Address Autoconfiguration (SLAAC) for dynamic assignment of IPv6 addresses to a host? ARPv6 DHCPv6 ICMPv6 UDP Answers Explanation & Hints: SLAAC uses ICMPv6 messages when dynamically…
Refer to the exhibit. An administrator must send a message to everyone on the router A network. What is the broadcast address for network 172.16.16.0/22? 172.16.16.255 172.16.20.255 172.16.19.255 172.16.23.255 172.16.255.255…
How many host addresses are available on the 192.168.10.128/26 network? 30 32 60 62 64 Answers Explanation & Hints: A /26 prefix gives 6 host bits, which provides a total…
An administrator wants to create four subnetworks from the network address 192.168.1.0/24. What is the network address and subnet mask of the second useable subnet? subnetwork 192.168.1.64 subnet mask 255.255.255.192…
Floor(config)# interface gi0/1 Floor(config-if)# description Connects to the Registrar LAN Floor(config-if)# ip address 192.168.225.223 255.255.255.0 Floor(config-if)# no shutdown Floor(config-if)# interface gi0/0 Floor(config-if)# description Connects to the Manager LAN Floor(config-if)# ip…
BldgA(config)# interface gi0/1 BldgA(config-if)# description Connects to the Medical LAN BldgA(config-if)# ip address 192.168.191.189 255.255.255.0 BldgA(config-if)# no shutdown BldgA(config-if)# interface gi0/0 BldgA(config-if)# description Connects to the Client LAN BldgA(config-if)# ip…
What property of ARP causes a reply only to the source sending an ARP request? The source MAC address appears in the header of the Ethernet frame. The destination MAC…
What property of ARP allows MAC addresses of frequently used servers to be fixed in the ARP table? A static IP-to-MAC address entry can be entered manually into an ARP…
Which term describes a field in the IPv4 packet header that contains an 8-bit binary value used to determine the priority of each packet? differentiated services destination IPv4 address source…
What are two potential network problems that can result from ARP operation? (Choose two.) Manually configuring static ARP associations could facilitate ARP poisoning or MAC address spoofing. On large networks…
Refer to the exhibit. A user PC has successfully transmitted packets to www.cisco.com. Which IP address does the user PC target in order to forward its data off the local…
The global configuration command ip default-gateway 172.16.100.1 is applied to a switch. What is the effect of this command? The switch will have a management interface with the address 172.16.100.1.…
Match the commands to the correct actions. (Not all options are used.) For more Questions and Answers: CCNA 1 v7 – ITN v7.02 – Modules 8 – 10: Communicating Between Networks…
Which two types of IPv6 messages are used in place of ARP for address resolution? anycast broadcast echo reply echo request neighbor solicitation neighbor advertisement Answers Explanation & Hints: IPv6…
Refer to the exhibit. The exhibit shows a small switched network and the contents of the MAC address table of the switch. PC1 has sent a frame addressed to PC3.…