A network administrator is configuring a prefix list with the command ipv6 prefix-list IPV6-1 seq 5 permit 2001:db8:abcd:30::/60 ge 61 le 63 Which two networks match the prefix match specification?…
A company is deploying BGP multihoming to provide network connection redundancy for several branch locations. One of the network design objectives is to provide deterministic routing among company locations during…
Refer to the exhibit. Which statement describes the condition when the BGP route-map TEST permit 40 command is processed and what is the result of processing? Only networks that do…
Refer to the exhibit. For which autonomous system would running BGP not be appropriate? 65002 65003 65004 65005 Answers Explanation & Hints: It is appropriate to use BGP when an…
Which BGP state is the one where BGP initiates the TCP connection and sends an Open message to the sender? Passive Established OpenSent Connect Explanation & Hint: The Connect state…
Which BGP attribute includes a complete list of all the ASNs that the prefix advertisement has traversed from its source AS? Next Hop Multiple-exit discriminator (MED) Local Preference (LocPrf) AS_Path…
Which BGP state is the one where BGP waits for a KEEPALIVE or NOTIFICATION message from a neighbor so that the BGP session can be moved to Established? Init Attempt…
Which BGP message is sent when an error is detected with the BGP session causing the BGP connection to close? Reply Query Database description Notification Explanation & Hint: When an…
Refer to the exhibit. A network administrator is configuring BGP on a router. What network layer protocol and function are enabled for the BGP session? IPv4 protocol with all the…
Which two statements describe the configuration differences when MP-BGP is applied using the IPv6 protocol compared to IPv4 protocol? (Choose two.) IPv6 uses multicast to establish neighbor sessions. IPv4 addresses…
A network administrator is configuring route summarization for received routes before advertising to the next peer with the commands: R1(config)# router bgp 65500 R1(config-router)# aggregate-address 172.16.0.0 255.255.240.0 as-set summary-only R1(config-router)#…
Refer to the exhibit. Which two configurations will allow router R1 to establish a neighbor relationship with router R2? (Choose two.) R1(config)# router bgp 65001 R1(config-router)# network 192.168.20.0 R1(config)# router…
Refer to the exhibit. A network administrator issues the show bgp ipv4 unicast command to check the routes in the BGP table. What does the indication of 0.0.0.0 under Next…
Match the values to AFI and SAFI extensions supported by MBGP. (Not all options are used.) Answers Explanation & Hints: To expand the support for multiple network layer protocols to…
Refer to the exhibit. Autonomous system 65500 is routing traffic between two external BGP autonomous systems, autonomous system 65200 and autonomous system 65100. Synchronization is disabled on BGP in autonomous…
Refer to the exhibit. What two addresses will OSPFv3 neighbors connected to the g0/1 interface of R2 use as the destination address for sending OSPFv3 link-state updates to R2? FF02::6…
What benefit is provided to OSPFv3 with the two new LSA types, type 8 and type 9? They eliminate SPF calculations when interface addresses are added or changed. They permit…
A network administrator enters the command ipv6 router ospf 64 in global configuration mode. What is the result of this command? The router will be assigned an autonomous system number…
How are OSPFv3 routes that are learned from type 1 LSAs identified in the IPv6 routing table? O OI IA EX Answers Explanation & Hints: OSPFv3 uses the code O…
Which is a difference between OSPFv2 and OSPFv3? OSPFv3 does not have built in support for neighbor authentication. OSPFv3 uses different packet types than OSPFv2. OSPFv3 uses a 128-bit router…