Last Updated on November 8, 2022 by InfraExam
MF Wireless LAN Security Quiz Answers
-
What interferer can be seen using the Cisco CleanAir technology?
-
Manipulated Management Frames
-
Microwave ovens
-
Rogue APs
-
Co-channel interference
-
-
What authentication method would you choose if your guest users need to be greeted with a splash page and login request?
-
Pre-share key
-
Local EAP
-
Web Authentication
-
MAC Filtering
-
-
What attacks does Management Frame Protection help to mitigate? (Choose 2)
-
Denial-of-service
-
Man-in-the-Middle
-
War driving
-
Reconnaissance
-
Eavesdropping
-
-
What device is used as the Authentication Server in an 802.1X implementation?
-
Wireless client
-
Ethernet switch
-
Application Server
-
Access point
-
RADIUS Server
-
-
When a wireless intrusion prevention system (WIPS) floods a rogue AP with de-authenticate messages, what is the possible reason?
-
Inhibit communication between the rogue AP and legitimate stations.
-
Prevent unauthorized clients from communicating with the rogue AP.
-
Locate the rogue AP so that it can be removed.
-
Prevent the rogue AP from communicating with the wired network.
-
-
Which authentication methods are most commonly used in Enterprise wireless deployments? (Choose 3)
-
EAP-FAST
-
CCKM
- PEAP
- AES
-
EAP-TLS
- WEP
-
-
With ______Passive_____ scanning a wireless device listens for a beacon frame for a set period of time. Once the device receives a beacon frame and the SSID, it can then attempt to join the network.
Note: You should type “Passive” with our system test. but for the test at netacad you can type “Passive” or “passive”. Both are correct. Non case sensitive for netacad testing system
-
The two primary security vulnerabilities of the original 802.11 wireless security mechanism are
-
Authenication
-
Access speed
-
Access codes
- Encryption
-
Management frames
-
-
The ___EAP__ is an “envelope” that can carry many different kinds of exchange data used for authentication, such as a challenge/response, one-time passwords, and digital certificates.
Noted: Type “EAP” in our test system. With netacad system, you can type any one of the following:
-
EAPeapextensible authentication protocolExtensible Authentication Protocol
-