Refer to the exhibit. Which set of commands will configure static routes that will allow the Park and the Alta routers to a) forward packets to each LAN and b) direct all other traffic to the Internet?

Last Updated on November 10, 2022 by InfraExam

Refer to the exhibit. Which set of commands will configure static routes that will allow the Park and the Alta routers to a) forward packets to each LAN and b) direct all other traffic to the Internet?

• Park(config)# ip route 0.0.0.0 0.0.0.0 192.168.14.1
  Alta(config)# ip route 10.0.234.0 255.255.255.0 192.168.14.2
  Alta(config)# ip route 0.0.0.0 0.0.0.0 s0/0/0
• Park(config)# ip route 0.0.0.0 0.0.0.0 192.168.14.1
  Alta(config)# ip route 10.0.234.0 255.255.255.0 192.168.14.2
  Alta(config)# ip route 198.18.222.0 255.255.255.255 s0/0/0
• Park(config)# ip route 172.16.67.0 255.255.255.0 192.168.14.1
  Park(config)# ip route 0.0.0.0 0.0.0.0 192.168.14.1
  Alta(config)# ip route 10.0.234.0 255.255.255.0 192.168.14.2
• Park(config)# ip route 172.16.67.0 255.255.255.0 192.168.14.1
  Alta(config)# ip route 10.0.234.0 255.255.255.0 192.168.14.2
  Alta(config)# ip route 0.0.0.0 0.0.0.0 s0/0/1

  Answers Explanation & Hints: The LAN connected to the router Park is a stub network, therefore, a default route should be used to forward network traffic destined to non-local networks. The router Alta connects to both the internet and the Park router, it would require two static routes configured, one toward the internet and the other toward the LAN connected to the router Park.

For more question and answers:

Click Here CCNA 2 SRWE v7 – Modules 14 – 16 – Routing Concepts and Configuration Exam Answers Full 100%