1.2.1 Packet Tracer – Inter-VLAN Routing Challenge Answers
Packet Tracer – Inter-VLAN Routing Challenge (Answers Version)
Answers Note: Red font color or gray highlights indicate text that appears in the Answers copy only.
Addressing Table
|
Device |
Interface |
IP Address |
Subnet Mask |
Default Gateway |
|
R1 |
G0/0 |
172.17.25.2 |
255.255.255.252 |
N/A |
|
R1 |
G0/1.10 |
172.17.10.1 |
255.255.255.0 |
N/A |
|
R1 |
G0/1.20 |
172.17.20.1 |
255.255.255.0 |
N/A |
|
R1 |
G0/1.30 |
172.17.30.1 |
255.255.255.0 |
N/A |
|
R1 |
G0/1.88 |
172.17.88.1 |
255.255.255.0 |
N/A |
|
R1 |
G0/1.99 |
172.17.99.1 |
255.255.255.0 |
N/A |
|
S1 |
VLAN 99 |
172.17.99.10 |
255.255.255.0 |
172.17.99.1 |
|
PC1 |
NIC |
172.17.10.21 |
255.255.255.0 |
172.17.10.1 |
|
PC2 |
NIC |
172.17.20.22 |
255.255.255.0 |
172.17.20.1 |
|
PC3 |
NIC |
172.17.30.23 |
255.255.255.0 |
172.17.30.1 |
|
Server |
NIC |
172.17.50.254 |
255.255.255.0 |
172.17.50.1 |
VLAN and Port Assignments Table
|
VLAN |
Name |
Interface |
|
10 |
Faculty/Staff |
F0/11-17 |
|
20 |
Students |
F0/18-24 |
|
30 |
Guest(Default) |
F0/6-10 |
|
88 |
Native |
G0/1 |
|
99 |
Management |
VLAN 99 |
Scenario
In this activity, you will demonstrate and reinforce your ability to implement inter-VLAN routing, including configuring IP addresses, VLANs, trunking, and subinterfaces.
Instructions
Configure the devices to meet the following requirements.
- Assign IP addressing to R1 and S1 based on the Addressing Table.
- Configure the default gateway on S1.
- Create, name, and assign VLANs on S1 based on the VLAN and Port Assignments Table. Ports should be in access mode. Your VLAN names should match the names in the table exactly.
- Configure G0/1 of S1 as a static trunk and assign the native VLAN.
- All ports that are not assigned to a VLAN should be disabled.
- Configure inter-VLAN routing on R1 based on the Addressing Table.
- Verify connectivity. R1, S1, and all PCs should be able to ping each other and the server.
End of document
Answer Scripts
Switch S1
en
config t
interface vlan 99
ip address 172.17.99.10 255.255.255.0
no shutdown
ip default-gateway 172.17.99.1
!Note: VLAN naming only requires the first letter be correct
vlan 10
name Faculty/Staff
vlan 20
name Students
vlan 30
name Guest(Default)
vlan 88
name Native
vlan 99
name Management
interface range f0/11 – 17
switchport mode access
switchport access vlan 10
interface range f0/18 – 24
switchport mode access
switchport access vlan 20
interface range f0/6 – 10
switchport mode access
switchport access vlan 30
interface g0/1
switchport mode trunk
switchport trunk native vlan 88
interface range f0/1-5,g0/2
shutdown
end
Router R1
ena
conf t
interface GigabitEthernet0/1
no shutdown
interface GigabitEthernet0/1.10
encapsulation dot1Q 10
ip address 172.17.10.1 255.255.255.0
interface GigabitEthernet0/1.20
encapsulation dot1Q 20
ip address 172.17.20.1 255.255.255.0
interface GigabitEthernet0/1.30
encapsulation dot1Q 30
ip address 172.17.30.1 255.255.255.0
interface GigabitEthernet0/1.88
encapsulation dot1Q 88 native
ip address 172.17.88.1 255.255.255.0
interface GigabitEthernet0/1.99
encapsulation dot1Q 99
ip address 172.17.99.1 255.255.255.0
end