Which flag in the TCP header is used in response to a received FIN in order to terminate connectivity between two network devices?

  • Post author:
  • Post category:Blog
  • Post comments:0 Comments
  • Post last modified:June 12, 2024
  • Reading time:1 mins read

Which flag in the TCP header is used in response to a received FIN in order to terminate connectivity between two network devices? FIN ACK SYN RST Answers Explanation &…

Continue ReadingWhich flag in the TCP header is used in response to a received FIN in order to terminate connectivity between two network devices?

What important information is added to the TCP/IP transport layer header to ensure communication and connectivity with a remote network device?

  • Post author:
  • Post category:Blog
  • Post comments:0 Comments
  • Post last modified:June 12, 2024
  • Reading time:1 mins read

What important information is added to the TCP/IP transport layer header to ensure communication and connectivity with a remote network device? timing and synchronization destination and source port numbers destination…

Continue ReadingWhat important information is added to the TCP/IP transport layer header to ensure communication and connectivity with a remote network device?

A user issues a ping 10.10.14.67 command and receives a response that includes a code of 0. What does this code represent?

  • Post author:
  • Post category:Blog
  • Post comments:0 Comments
  • Post last modified:June 12, 2024
  • Reading time:1 mins read

A user issues a ping 10.10.14.67 command and receives a response that includes a code of 0. What does this code represent? network unreachable protocol unreachable port unreachable host unreachable…

Continue ReadingA user issues a ping 10.10.14.67 command and receives a response that includes a code of 0. What does this code represent?

What are the three IPv6 addresses displayed when the route from PC1 to PC2 is traced? (Choose three.)

  • Post author:
  • Post category:Blog
  • Post comments:0 Comments
  • Post last modified:June 12, 2024
  • Reading time:2 mins read

Open the PT Activity. Perform the tasks in the activity instructions and then answer the question. What are the three IPv6 addresses displayed when the route from PC1 to PC2…

Continue ReadingWhat are the three IPv6 addresses displayed when the route from PC1 to PC2 is traced? (Choose three.)

Which protocol is used by the traceroute command to send and receive echo-requests and echo-replies?

  • Post author:
  • Post category:Blog
  • Post comments:0 Comments
  • Post last modified:June 12, 2024
  • Reading time:1 mins read

Which protocol is used by the traceroute command to send and receive echo-requests and echo-replies? SNMP ICMP Telnet TCP Answers Explanation & Hints: Traceroute uses the ICMP (Internet Control Message…

Continue ReadingWhich protocol is used by the traceroute command to send and receive echo-requests and echo-replies?

Refer to the exhibit. An administrator is trying to troubleshoot connectivity between PC1 and PC2 and uses the tracert command from PC1 to do it. Based on the displayed output, where should the administrator begin troubleshooting?

  • Post author:
  • Post category:Blog
  • Post comments:0 Comments
  • Post last modified:June 12, 2024
  • Reading time:2 mins read

Refer to the exhibit. An administrator is trying to troubleshoot connectivity between PC1 and PC2 and uses the tracert command from PC1 to do it. Based on the displayed output,…

Continue ReadingRefer to the exhibit. An administrator is trying to troubleshoot connectivity between PC1 and PC2 and uses the tracert command from PC1 to do it. Based on the displayed output, where should the administrator begin troubleshooting?

A technician uses the ping 127.0.0.1 command. What is the technician testing?

  • Post author:
  • Post category:Blog
  • Post comments:0 Comments
  • Post last modified:June 12, 2024
  • Reading time:1 mins read

A technician uses the ping 127.0.0.1 command. What is the technician testing? the TCP/IP stack on a network host connectivity between two adjacent Cisco devices connectivity between a PC and…

Continue ReadingA technician uses the ping 127.0.0.1 command. What is the technician testing?

Three methods allow IPv6 and IPv4 to co-exist. Match each method with its description. (Not all options are used.)

  • Post author:
  • Post category:Blog
  • Post comments:0 Comments
  • Post last modified:June 12, 2024
  • Reading time:1 mins read

Three methods allow IPv6 and IPv4 to co-exist. Match each method with its description. (Not all options are used.) Answers Explanation & Hints: The term for the method that allows…

Continue ReadingThree methods allow IPv6 and IPv4 to co-exist. Match each method with its description. (Not all options are used.)

What are two types of IPv6 unicast addresses? (Choose two.)

  • Post author:
  • Post category:Blog
  • Post comments:0 Comments
  • Post last modified:June 12, 2024
  • Reading time:1 mins read

What are two types of IPv6 unicast addresses? (Choose two.) multicast loopback link-local anycast broadcast Answers Explanation & Hints: Multicast, anycast, and unicast are types of IPv6 addresses. There is…

Continue ReadingWhat are two types of IPv6 unicast addresses? (Choose two.)

Which type of IPv6 address refers to any unicast address that is assigned to multiple hosts?

  • Post author:
  • Post category:Blog
  • Post comments:0 Comments
  • Post last modified:June 12, 2024
  • Reading time:1 mins read

Which type of IPv6 address refers to any unicast address that is assigned to multiple hosts? unique local global unicast link-local anycast Answers Explanation & Hints: The IPv6 specifications include…

Continue ReadingWhich type of IPv6 address refers to any unicast address that is assigned to multiple hosts?

Which IPv6 prefix is reserved for communication between devices on the same link?

  • Post author:
  • Post category:Blog
  • Post comments:0 Comments
  • Post last modified:June 12, 2024
  • Reading time:1 mins read

Which IPv6 prefix is reserved for communication between devices on the same link? FC00::/7 2001::/32 FE80::/10 FDFF::/7 Answers Explanation & Hints: IPv6 link-local unicast addresses are in the FE80::/10 prefix…

Continue ReadingWhich IPv6 prefix is reserved for communication between devices on the same link?

What is the prefix for the host address 2001:DB8:BC15:A:12AB::1/64?

  • Post author:
  • Post category:Blog
  • Post comments:0 Comments
  • Post last modified:June 12, 2024
  • Reading time:1 mins read

What is the prefix for the host address 2001:DB8:BC15:A:12AB::1/64? 2001:DB8:BC15 2001:DB8:BC15:A 2001:DB8:BC15:A:1 2001:DB8:BC15:A:12 Answers Explanation & Hints: The network portion, or prefix, of an IPv6 address is identified through the…

Continue ReadingWhat is the prefix for the host address 2001:DB8:BC15:A:12AB::1/64?

What is used in the EUI-64 process to create an IPv6 interface ID on an IPv6 enabled interface?

  • Post author:
  • Post category:Blog
  • Post comments:0 Comments
  • Post last modified:June 12, 2024
  • Reading time:1 mins read

What is used in the EUI-64 process to create an IPv6 interface ID on an IPv6 enabled interface? the MAC address of the IPv6 enabled interface a randomly generated 64-bit…

Continue ReadingWhat is used in the EUI-64 process to create an IPv6 interface ID on an IPv6 enabled interface?

Refer to the exhibit. A company is deploying an IPv6 addressing scheme for its network. The company design document indicates that the subnet portion of the IPv6 addresses is used for the new hierarchical network design, with the site subsection to represent multiple geographical sites of the company, the sub-site section to represent multiple campuses at each site, and the subnet section to indicate each network segment separated by routers. With such a scheme, what is the maximum number of subnets achieved per sub-site?

  • Post author:
  • Post category:Blog
  • Post comments:0 Comments
  • Post last modified:June 12, 2024
  • Reading time:2 mins read

Refer to the exhibit. A company is deploying an IPv6 addressing scheme for its network. The company design document indicates that the subnet portion of the IPv6 addresses is used…

Continue ReadingRefer to the exhibit. A company is deploying an IPv6 addressing scheme for its network. The company design document indicates that the subnet portion of the IPv6 addresses is used for the new hierarchical network design, with the site subsection to represent multiple geographical sites of the company, the sub-site section to represent multiple campuses at each site, and the subnet section to indicate each network segment separated by routers. With such a scheme, what is the maximum number of subnets achieved per sub-site?

Consider the following range of addresses: The prefix-length for the range of addresses is                /60            .

  • Post author:
  • Post category:Blog
  • Post comments:0 Comments
  • Post last modified:June 12, 2024
  • Reading time:1 mins read

Consider the following range of addresses: 2001:0DB8:BC15:00A0:0000:: 2001:0DB8:BC15:00A1:0000:: 2001:0DB8:BC15:00A2:0000:: ... 2001:0DB8:BC15:00AF:0000:: The prefix-length for the range of addresses is                /60       …

Continue ReadingConsider the following range of addresses: The prefix-length for the range of addresses is                /60            .