Refer to the exhibit. PC1 is unable to communicate with server 1. The network administrator issues the show interfaces trunk command to begin troubleshooting. What conclusion can be made based on the output of this command?

  • Post author:
  • Post category:Blog
  • Post comments:0 Comments
  • Post last modified:June 12, 2024
  • Reading time:2 mins read

Refer to the exhibit. PC1 is unable to communicate with server 1. The network administrator issues the show interfaces trunk command to begin troubleshooting. What conclusion can be made based…

Continue ReadingRefer to the exhibit. PC1 is unable to communicate with server 1. The network administrator issues the show interfaces trunk command to begin troubleshooting. What conclusion can be made based on the output of this command?

Refer to the exhibit. In what switch mode should port G0/1 be assigned if Cisco best practices are being used?

  • Post author:
  • Post category:Blog
  • Post comments:0 Comments
  • Post last modified:June 12, 2024
  • Reading time:2 mins read

Refer to the exhibit. In what switch mode should port G0/1 be assigned if Cisco best practices are being used? access trunk native auto Answers Explanation & Hints: The router…

Continue ReadingRefer to the exhibit. In what switch mode should port G0/1 be assigned if Cisco best practices are being used?

What information is added to the switch table from incoming frames?

  • Post author:
  • Post category:Blog
  • Post comments:0 Comments
  • Post last modified:June 12, 2024
  • Reading time:1 mins read

What information is added to the switch table from incoming frames? source MAC address and incoming port number destination MAC address and incoming port number source IP address and incoming…

Continue ReadingWhat information is added to the switch table from incoming frames?

Refer to the exhibit. A switch receives a Layer 2 frame that contains a source MAC address of 000b.a023.c501 and a destination MAC address of 0050.0fae.75aa. Place the switch steps in the order they occur. (Not all options are used.)

  • Post author:
  • Post category:Blog
  • Post comments:0 Comments
  • Post last modified:June 12, 2024
  • Reading time:2 mins read

Refer to the exhibit. A switch receives a Layer 2 frame that contains a source MAC address of 000b.a023.c501 and a destination MAC address of 0050.0fae.75aa. Place the switch steps…

Continue ReadingRefer to the exhibit. A switch receives a Layer 2 frame that contains a source MAC address of 000b.a023.c501 and a destination MAC address of 0050.0fae.75aa. Place the switch steps in the order they occur. (Not all options are used.)

Which switch characteristic helps keep traffic local and alleviates network congestion?

  • Post author:
  • Post category:Blog
  • Post comments:0 Comments
  • Post last modified:June 12, 2024
  • Reading time:1 mins read

Which switch characteristic helps keep traffic local and alleviates network congestion? high port density fast port speed large frame buffers fast internal switching Answers Explanation & Hints: Switches that have…

Continue ReadingWhich switch characteristic helps keep traffic local and alleviates network congestion?

Which command is used to set the BOOT environment variable that defines where to find the IOS image file on a switch?

  • Post author:
  • Post category:Blog
  • Post comments:0 Comments
  • Post last modified:June 12, 2024
  • Reading time:1 mins read

Which command is used to set the BOOT environment variable that defines where to find the IOS image file on a switch? config-register boot system boot loader confreg Answers Explanation…

Continue ReadingWhich command is used to set the BOOT environment variable that defines where to find the IOS image file on a switch?

A network technician is troubleshooting an issue and needs to verify all of the IPv6 interface addresses on a router. What is the best command to use to accomplish the task?

  • Post author:
  • Post category:Blog
  • Post comments:0 Comments
  • Post last modified:June 12, 2024
  • Reading time:2 mins read

A network technician is troubleshooting an issue and needs to verify all of the IPv6 interface addresses on a router. What is the best command to use to accomplish the…

Continue ReadingA network technician is troubleshooting an issue and needs to verify all of the IPv6 interface addresses on a router. What is the best command to use to accomplish the task?

A student wants to save a router configuration to NVRAM. What is the best command to use to accomplish the task?

  • Post author:
  • Post category:Blog
  • Post comments:0 Comments
  • Post last modified:June 12, 2024
  • Reading time:2 mins read

A student wants to save a router configuration to NVRAM. What is the best command to use to accomplish the task? copy running-config startup-config show interfaces show ip nat translations…

Continue ReadingA student wants to save a router configuration to NVRAM. What is the best command to use to accomplish the task?

An employee complains that a Windows PC cannot connect to the Internet. A network technician issues the ipconfig command on the PC and is shown an IP address of 169.254.10.3. Which two conclusions can be drawn? (Choose two.)

  • Post author:
  • Post category:Blog
  • Post comments:0 Comments
  • Post last modified:June 12, 2024
  • Reading time:2 mins read

An employee complains that a Windows PC cannot connect to the Internet. A network technician issues the ipconfig command on the PC and is shown an IP address of 169.254.10.3.…

Continue ReadingAn employee complains that a Windows PC cannot connect to the Internet. A network technician issues the ipconfig command on the PC and is shown an IP address of 169.254.10.3. Which two conclusions can be drawn? (Choose two.)

A network engineer is analyzing reports from a recently performed network baseline. Which situation would depict a possible latency issue?

  • Post author:
  • Post category:Blog
  • Post comments:0 Comments
  • Post last modified:June 12, 2024
  • Reading time:1 mins read

A network engineer is analyzing reports from a recently performed network baseline. Which situation would depict a possible latency issue? a change in the bandwidth according to the show interfaces output…

Continue ReadingA network engineer is analyzing reports from a recently performed network baseline. Which situation would depict a possible latency issue?

A user issues a ping 198.133.219.8 command and receives a response that includes a code of 0. What does this code represent?

  • Post author:
  • Post category:Blog
  • Post comments:0 Comments
  • Post last modified:June 12, 2024
  • Reading time:2 mins read

A user issues a ping 198.133.219.8 command and receives a response that includes a code of 0. What does this code represent? network unreachable protocol unreachable port unreachable host unreachable…

Continue ReadingA user issues a ping 198.133.219.8 command and receives a response that includes a code of 0. What does this code represent?

A user issues a ping 192.135.250.103 command and receives a response that includes a code of 1. What does this code represent?

  • Post author:
  • Post category:Blog
  • Post comments:0 Comments
  • Post last modified:June 12, 2024
  • Reading time:1 mins read

A user issues a ping 192.135.250.103 command and receives a response that includes a code of 1. What does this code represent? host unreachable beyond scope of the source address…

Continue ReadingA user issues a ping 192.135.250.103 command and receives a response that includes a code of 1. What does this code represent?

Which ICMPv6 message is sent when the IPv6 hop limit field of a packet is decremented to zero and the packet cannot be forwarded?

  • Post author:
  • Post category:Blog
  • Post comments:0 Comments
  • Post last modified:June 12, 2024
  • Reading time:1 mins read

Which ICMPv6 message is sent when the IPv6 hop limit field of a packet is decremented to zero and the packet cannot be forwarded? network unreachable time exceeded protocol unreachable…

Continue ReadingWhich ICMPv6 message is sent when the IPv6 hop limit field of a packet is decremented to zero and the packet cannot be forwarded?

A high school in New York (school A) is using videoconferencing technology to establish student interactions with another high school (school B) in Russia. The videoconferencing is conducted between two end devices through the Internet. The network administrator of school A configures the end device with the IP address 209.165.201.10. The administrator sends a request for the IP address for the end device in school B and the response is 192.168.25.10. Neither school is using a VPN. The administrator knows immediately that this IP will not work. Why?

  • Post author:
  • Post category:Blog
  • Post comments:0 Comments
  • Post last modified:June 12, 2024
  • Reading time:2 mins read

A high school in New York (school A) is using videoconferencing technology to establish student interactions with another high school (school B) in Russia. The videoconferencing is conducted between two…

Continue ReadingA high school in New York (school A) is using videoconferencing technology to establish student interactions with another high school (school B) in Russia. The videoconferencing is conducted between two end devices through the Internet. The network administrator of school A configures the end device with the IP address 209.165.201.10. The administrator sends a request for the IP address for the end device in school B and the response is 192.168.25.10. Neither school is using a VPN. The administrator knows immediately that this IP will not work. Why?

What property of ARP causes the NICs receiving an ARP request to pass the data portion of the Ethernet frame to the ARP process?

  • Post author:
  • Post category:Blog
  • Post comments:0 Comments
  • Post last modified:June 12, 2024
  • Reading time:2 mins read

What property of ARP causes the NICs receiving an ARP request to pass the data portion of the Ethernet frame to the ARP process? The type field 0x806 appears in…

Continue ReadingWhat property of ARP causes the NICs receiving an ARP request to pass the data portion of the Ethernet frame to the ARP process?

What property of ARP causes the request to be flooded out all ports of a switch except for the port receiving the ARP request?

  • Post author:
  • Post category:Blog
  • Post comments:0 Comments
  • Post last modified:June 12, 2024
  • Reading time:1 mins read

What property of ARP causes the request to be flooded out all ports of a switch except for the port receiving the ARP request? The destination MAC address FF-FF-FF-FF-FF-FF appears…

Continue ReadingWhat property of ARP causes the request to be flooded out all ports of a switch except for the port receiving the ARP request?

What property of ARP forces all Ethernet NICs to process an ARP request?

  • Post author:
  • Post category:Blog
  • Post comments:0 Comments
  • Post last modified:June 12, 2024
  • Reading time:2 mins read

What property of ARP forces all Ethernet NICs to process an ARP request? The destination MAC address FF-FF-FF-FF-FF-FF appears in the header of the Ethernet frame. The source MAC address…

Continue ReadingWhat property of ARP forces all Ethernet NICs to process an ARP request?