What happens when an edge router using IntServ QoS determines that the data pathway cannot support the level of QoS requested? Data is forwarded along the pathway using a best-effort…
The bootstrap router (BSR) mechanism of automating the distribution of rendezvous point (RP) information uses which IP address to disseminate information to all protocol independent multicast (PIM) routers? 224.0.0.13 224.0.1.13…
Which two statements about Protocol Independent Multicast (PIM) are true? (Choose two.) PIM does not require an IGP protocol to be configured in the network. PIM should be configured only…
An administrator has configured and enabled multicast together with PIM sparse mode on all VLANs on the network. Which feature helps to reduce multicast traffic being broadcast on the access…
Which statement about IGMPv3 is true? It sends IGMP query messages with a TTL value of 1 addressed to the all-host group (224.0.0.1). It does not accept a leave group…
A network administrator statically assigns a multicast address of 239.255.8.5 to an application running on a server. The NIC on the server is with the MAC address of AB.54.C1.01.B8.9F. Which…
Refer to the exhibit. A network administrator is troubleshooting BGP configuration and wants to display only routes that originated in AS 40. Which regular expression should the administrator use in…
A network administrator is configuring a prefix list to match networks for BGP route filtering. Which two networks match the prefix match specification 10.224.0.0/12 ge 24 le 28 ? (Choose…
Which BGP attribute can be configured on IBGP speakers so they will choose a desired path out of the autonomous system to an outside network? MED next hop aggregate local…
Which three statements describe the weight attribute for BGP? (Choose three.) It is a Cisco-defined attribute. It is not advertised to other routers. It is a 16-bit value assigned locally…
Refer to the exhibit. Considering the route map configuration for BGP, which statement describes the condition for a network prefix to match the route map TEST ? If the processing…
A company is deploying BGP multihoming to provide network connection redundancy for several branch locations. One of the network design objectives is to provide deterministic routing among company locations during…
Refer to the exhibit. Which statement describes the condition when the BGP route-map TEST permit 40 command is processed and what is the result of processing? Only networks that do…
Which BGP state is the one where BGP initiates the TCP connection and sends an Open message to the sender? Passive Established OpenSent Connect Explanation & Hint: The Connect state…
Which BGP attribute includes a complete list of all the ASNs that the prefix advertisement has traversed from its source AS? Next Hop Multiple-exit discriminator (MED) Local Preference (LocPrf) AS_Path…
Which BGP state is the one where BGP waits for a KEEPALIVE or NOTIFICATION message from a neighbor so that the BGP session can be moved to Established? Init Attempt…
Refer to the exhibit. Which two configurations will allow router R1 to establish a neighbor relationship with router R2? (Choose two.) R1(config)# router bgp 65001 R1(config-router)# network 192.168.20.0 R1(config)# router…
Refer to the exhibit. A network administrator issues the show bgp ipv4 unicast command to check the routes in the BGP table. What does the indication of 0.0.0.0 under Next…
Refer to the exhibit. Autonomous system 65500 is routing traffic between two external BGP autonomous systems, autonomous system 65200 and autonomous system 65100. Synchronization is disabled on BGP in autonomous…
Refer to the exhibit. What two addresses will OSPFv3 neighbors connected to the g0/1 interface of R2 use as the destination address for sending OSPFv3 link-state updates to R2? FF02::6…