IT Essentials 8.0 & ITE 7.02 Chapter 8 Exam Answers 100% 2023 2024

IT Essentials 8 Chapter 8 Exam Answers | IT Essentials 7 Chapter 8 Exam Answers Full 100% 2023 2024

This is serial collection of Cisco NetAcad ITE 8, ITE 8.0, ITE 8.01, ITE 7, ITE 7.0, ITE 7.02, ITE v8, ITE v8.0, ITE v8.01, ITE v7, ITE v7.0, ITE v7.02, ITE Version 8, ITE Version 8.0, ITE Version 8.01, ITE Version 7, ITE Version 7.0, ITE Version 7.02, IT Essentials 8, IT Essentials 7.02, IT Essentials 8.01, IT Essentials 7, IT Essentials 7.0, and IT Essentials 8.0 Chapter 8 Exam Answers in 2023 2024. We also combine two more versions of IT Essentials (Version 8.0) – IT Essentials 8.0 Chapter 8 exam answers and IT Essentials (Version 7.00) – IT Essentials 7.0 Chapter 8 exam answers in the page too. All questions and answers were verified by experts to get the full 100%.

IT Essentials 8 Chapter 8 Exam Answers | ITE 8.0 Chapter 8 Exam Answers | Full 100%

1. What are two cables that are used to connect a computer to a printer? (Choose two.)

   • serial
   • FireWire
   • PS/2
   • HDMI
   • eSATA
     

     Answers Explanation & Hints: Wiring a PC to a printer can be done through the following connections: serial, parallel (IEEE 1284 and SCSI), USB, Firewire (IEEE 1394) and Ethernet. PS/2, HDMI, and eSATA connections are used for other purposes.

2. Match the common printer configuration options to the correct descriptions. (Not all options are used.)

   

3. What are two functions of a print server? (Choose two.)

   • provide print resources to all connected client computers
   • store print jobs in a queue until the printer is ready
   • ensure that the connected client computers have up-to-date printer drivers
   • store backups of documents sent to the printer
   • provide uninterrupted power to the printer
     

     Answers Explanation & Hints: A print server can provide client computers access to print resources, manage print jobs by storing them in a queue until the print device is ready for them, and provide print job status messages to users.

4. What are two methods to connect to a printer wirelessly? (Choose two.)

   • IEEE 802.11 standards
   • Bluetooth
   • WiMax
   • satellite
   • microwave
     

     Answers Explanation & Hints: Wireless printers can use Bluetooth, 802.11x, or infrared interfaces to connect wirelessly. WiMax, satellite, and microwave radio technologies are in practice never used to connect a printer to a network.

5. What are two probable causes for printer paper jams? (Choose two.)

   • high humidity
   • the wrong type of paper
   • a defective print cartridge
   • misaligned print heads
   • an incorrect print driver
     

     Answers Explanation & Hints: Humidity can cause sheets of paper to stick together which could cause paper jams. Using the wrong type of paper for a printer might also create a jamming issue.

6. Which factor affects the speed of an inkjet printer?

   • the desired quality of the image
   • the size of printer power supply
   • the quality of the paper
   • the cost of the inkjet cartridges
     

     Answers Explanation & Hints: The speed of an inkjet printer is determined mostly by the make and model of the printer, the quality of printing, and the complexity of the image. The quality of the paper, the cost of the cartridges, and the size of the power supply do not affect the speed of printing.

7. What is a characteristic of thermal inkjet nozzles?

   • The heat creates a bubble of steam in the chamber.
   • Heat is applied to the ink reservoir of each nozzle.
   • The vibration of the crystal controls the flow of ink.
   • A charge is applied to the printhead.
     

     Answers Explanation & Hints: Thermal inkjet nozzles work based on heat creating steam bubbles. Piezoelectric inkjet nozzles work based on vibration of crystals.

8. In laser printing, what is the name of the process of applying toner to the latent image on the drum?

   • developing
   • charging
   • transferring
   • fusing
     

     Answers Explanation & Hints: The toner is applied to the latent image on the drum during developing. The toner attached to the latent image is transferred to the paper during transferring. The toner transferred is melted to the paper during fusing, and the drum gets a uniform negative charge during charging.

9. What is the purpose of the Additional Drivers button in the Sharing tab of the Printer Properties?

   • to add additional drivers for other operating systems
   • to add additional drivers for other printers in the network
   • to add additional drivers for duplex printing
   • to add additional drivers for other printers connected to the computer
     

     Answers Explanation & Hints: The Additional Drivers button loads drivers in the sharing computer for other operating systems that the client computers may be running. For other printers in the network, the drivers must be loaded in the computers sharing the other printers. There is no need for additional drivers for duplex printing. The required drivers for other printers connected to the sharing computer will be loaded automatically.

10. A user discovers that an inkjet color printer is printing different colors from those that are shown on the screen. What can be done to solve this problem?

    • Calibrate the printer.
    • Adjust the printer spool.
    • Replace the fuser.
    • Replace the drum.
      

      Answers Explanation & Hints: Calibrating the printer will align the heads and help in dosing the ink. The print spool problems are more related to queues. Color inkjet printers do not use drums or fusers.

11. After applying a solution to a printer problem, a technician restarts the printer and prints a test page. Which step of the troubleshooting process is the technician applying?

    • verifying the solution and system functionality
    • identifying the problem
    • testing a theory to determine the cause of the problem
    • documenting findings, actions, and outcomes
      

      Answers Explanation & Hints: Testing a printer by restarting it and printing a test page are actions taken within the verification of the solution and system functionality step.

12. A technician recorded that a new fuser roller unit was installed in a laser printer to solve a printing problem. Which step in the troubleshooting process did the technician just perform?

    • documenting findings, actions, and outcomes
    • verifying the solution and system functionality
    • identifying the problem
    • testing a theory to determine the cause of the problem
      

      Answers Explanation & Hints: Recording the components and parts used to fix a printer problem is part of the documenting findings, actions, and outcomes step.

13. Which action supports an effective printer preventive maintenance program?

    • Reset the printer page counters if available.
    • Replace laser printer toner at set predetermined time intervals.
    • Clean inkjet print heads when they stop working.
    • Disconnect the printer from the power source when it is not in use.
      

      Answers Explanation & Hints: Resetting the page counters will assist in documenting printer usage and planning future maintenance. Cleaning parts only when they are no longer working, replacing consumables at set time intervals regardless of need, and disconnecting the printer from the power when it is not in use are not related to a preventive maintenance program.

14. How can the life of a thermal printer be extended?

    • Clean the heating element regularly with isopropyl alcohol.
    • Clean the inside of the printer with a vacuum cleaner with a HEPA filter.
    • Keep the paper dry in a low humidity environment.
    • Wipe the outside of the printer with a damp cloth.
      

      Answers Explanation & Hints: The life of a thermal printer can be extended by cleaning the heating element regularly with isopropyl alcohol. A thermal printer does not use toner, so cleaning with a vacuum cleaner with a HEPA filter is not necessary. The condition of the paper and the cleanliness of the outside of the printer would probably do little to extend the life of the printer.

15. The users on a LAN are reporting that computers respond slowly whenever high resolution photographs are being printed on the color laser printer. What would be the cause of this problem?

    • The printer does not have enough memory to buffer an entire photograph.
    • The printer is not configured for duplex printing.
    • The paper is not adequate for photograph printing.
    • The printer is not configured for the proper paper orientation.
      

      Answers Explanation & Hints: Printer memory affects print speed and efficiency. Laser printers use memory to buffer print jobs, capturing them in printer memory while allowing computers to proceed with other work while printing.

16. A technician is installing a printer that will be directly connected to a computer. Why does the technician not connect the printer initially during the installation process?

    • The printer needs to be configured first.
    • The OS of the workstation needs to be updated first.
    • The printer driver might need to be installed first before the printer is connected.
    • The Microsoft download site needs to be searched first for the printer driver.
      

      Answers Explanation & Hints: When installing a new printer that is attached directly to a workstation, a technician should read the installation instructions carefully. For some printers, the printer driver should be installed on the computer before the printer is connected.

17. Which statement describes a printer driver?

    • It is the interface in Windows that identifies a unique printer attached to the workstation.
    • It is cache inside a printer that stores documents to be printed in a queue.
    • It is software that converts a document into the format that a printer can understand.
    • It is the configuration code that is sent to a printer to identify the operating system of the workstation.
      

      Answers Explanation & Hints: Printer drivers are software programs that convert various media types in a document to a stream of commands in a language that the printer can understand. During a printer installation, Windows links an interface called “printer” with a specific driver that is compatible with the actual printer hardware.

18. What type of connection would be used to connect a printer directly to the network?

    • Ethernet
    • serial
    • USB
    • Firewire
      

      Answers Explanation & Hints: To connect a printer directly to the network an Ethernet connection through an RJ-45 interface would be used.

19. What mechanism is used in a laser printer to permanently fuse the toner to the paper?

    • heat
    • electrical charge
    • pressure
    • light
      

      Answers Explanation & Hints: Heat is used during the fusing process in a laser printer to permanently fuse the toner to the paper.

20. What corrective action would a technician take in response to a print spooler error?

    • reboot the printer
    • restart the print spooler
    • update the printer driver
    • clean the printer
      

      Answers Explanation & Hints: Print spooler errors can occur when the printer service is stopped or not working properly. The first corrective action is to restart the print spooler. In some cases, it may be necessary to reboot the computer.

21. What corrective action should be taken if a printer is printing faded images?

    • secure loose printer cables
    • update the print driver
    • clean the printer
    • replace the toner cartridge
      

      Answers Explanation & Hints: If a printer is printing faded images, it is an indication that either the toner is low or the toner cartridge is defective.

22. What would cause an inkjet printer to fail to print any pages?

    • The printer software is set to toner save.
    • The printer ribbon is worn out.
    • The ink cartridge is empty.
    • The printer is loaded with a paper type other than photo paper.
      

      Answers Explanation & Hints: An inkjet printer will commonly fail to print when the inkjet cartridge is empty.

23. A user tells a technician that the printer does not respond to attempts to print a document. The technician attempts to print a document and the printer does not output any pages. The technician notices that the printer LCD display is blank and unlit. What is most likely the problem?

    • The screen contrast is too low.
    • The printer is not turned on.
    • The printer is out of ink.
    • The print head is clogged.
      

      Answers Explanation & Hints: If the printer display is displaying nothing and the printer is not attempting to print a document, most likely the printer is turned off.

24. A small company is moving towards sharing printers to reduce the number of printers used within the company. The technician has security concerns. What security risk is associated with sharing a printer?

    • data privacy
    • dumpster diving
    • shoulder surfing
    • replay attacks
      

      Answers Explanation & Hints: Three security concerns related to shared printers include (1) cached print files could contain sensitive data; (2) user authentication is needed to control access to the printer; and (3) print jobs could be read by others, intercepted, copied, or modified. Dumpster diving and shoulder surfing are security concerns whether the printer is shared or not. A replay attack is where a packet is captured, altered, and sent back to the original destination. Print jobs are not commonly returned to the sender.

25. A technician is programming a wireless printer to connect to the wireless network and communicate wirelessly with nearby devices. Which two wireless modes are used for wireless printer connectivity? (Choose two.)

    • ad hoc
    • hands-free
    • infrastructure
    • IR
    • cloud-based
      

      Answers Explanation & Hints: A wireless printer can operate in infrastructure mode and connect to an 802.11 Wi-Fi wireless network. A wireless printer might also support ad hoc mode which allows devices to communicate directly with the wireless printer.

26. Which device can scan a document and attach the scan to an email?

    • networked MFD
    • thermal printer
    • laser printer
    • automatic document feeder
      

      Answers Explanation & Hints: A networked MFD can scan a document and attach the scan to an email. Thermal printers, laser printers, and automatic document feeders can not attach scanned documents to emails.

27. Which document function can a networked MFD provide that is unavailable on a standalone document copier or printer?

    • scan to email
    • scan to paper
    • scan to local memory
    • scan to multiple paper copies
      

      Answers Explanation & Hints: In addition to the functions of a standalone document copier or printer, a networked MFD can scan a document to email, a network folder on the LAN, and a cloud storage location.

28. A technician is complaining about the following printer issue: The toner is not fusing to the paper. What are two possible causes of this issue? (Choose two.)

    • The toner cartridge is defective.
    • The paper might be incompatible with the printer.
    • A test page was never printed.
    • The laser printer is emitting too much radiation.
    • The printer lid has not been closed securely.

29. A librarian is complaining about the following printer issue: My impact printer produces faded or light characters. What are two possible causes of this issue? (Choose two.)

    • The ribbon may be worn out.
    • The ribbon may be damaged.
    • The printer does not have enough RAM.
    • The wrong printer type has been selected.
    • The laser printer is emitting too much radiation.

30. A teacher is complaining about the following printer issue: The paper is creased after printing. What are two possible causes of this issue? (Choose two.)

    • The paper-feed tray might not be firmly adjusted against the edges of the printer.
    • The paper might be loaded incorrectly.
    • The printer has been installed on the wrong port.
    • The wrong printer type has been selected.
    • The laser printer is emitting too much radiation.

31. A receptionist is complaining about the following printer issue: The print queue seems to be functioning properly, but the printer does not print. What are two possible causes of this issue? (Choose two.)

    • There is a bad cable connection.
    • The printer has an error such as out of paper, out of toner, or paper jam.
    • The print queue is overloaded.
    • The wrong printer type has been selected.
    • The laser printer is emitting too much radiation.

32. A photographer is complaining about the following printer issue: The printer issues a “Document failed to print” message. What are two possible causes of this issue? (Choose two.)

    • A cable is loose or disconnected.
    • The printer is no longer shared.
    • The paper tray is flimsy.
    • The wrong printer type has been selected.
    • The laser printer is emitting too much radiation.

33. A reporter is complaining about the following printer issue: The paper jams when the printer is printing. What are two possible causes of this issue? (Choose two.)

    • The printer could be dirty.
    • The humidity could be high and that causes the paper to stick together.
    • The laser printer is emitting too much radiation.
    • The wrong printer type has been selected.
    • The printer lid has not been closed securely.

34. A manager is complaining about the following printer issue: The ink printer is printing blank pages. What are two possible causes of this issue? (Choose two.)

    • The print head is clogged.
    • The printer is out of ink or toner.
    • The printer is using the wrong cable.
    • The wrong printer type has been selected.
    • The laser printer is emitting too much radiation.

35. A technician is complaining about the following printer issue: The print appears faded on the paper. What are two possible causes of this issue? (Choose two.)

    • The toner cartridge is low.
    • The paper might be incompatible with the printer.
    • A test page was never printed.
    • The room temperature is above normal.
    • The printer is using the wrong cable.

36. A librarian is complaining about the following printer issue: The printer control panel displays no image. What are two possible causes of this issue? (Choose two.)

    • The contrast of the screen may be set too low.
    • The printer is not turned on.
    • The room temperature is above normal.
    • The printer does not have enough RAM.
    • The printer is using the wrong cable.

37. A teacher is complaining about the following printer issue: The paper is creased after printing. What are two possible causes of this issue? (Choose two.)

    • The paper-feed tray might not be firmly adjusted against the edges of the printer.
    • The paper might be loaded incorrectly.
    • Print jobs are being sent to the wrong printer.
    • The room temperature is above normal.
    • The printer is using the wrong cable.

38. A user complains that recently every printed document has vertical lines and streaks on the paper. What should the technician do to resolve the issue?

    • Distribute the toner more evenly within the cartridge.
    • Reset the page counter.
    • Connect the printer using wireless.
    • Update the BIOS.
    • Install a USB hub.

39. A school is installing a new shared printer but the printer is not showing up on the list of available printers. What should the technician do to resolve the issue?

    • Manually add the printer IP address.
    • Reset the page counter.
    • Configure the printer for duplex printing.
    • Power cycle the printer.
    • Update the OS.

40. A school is installing a new shared printer but the printer is not showing up on the list of available printers. What should the technician do to resolve the issue?

    • Manually add the printer IP address.
    • Check the vibration of the crystals.
    • Configure the printer for duplex printing.
    • Power cycle the printer.
    • Update the OS.

41. Employees are complaining that they send print jobs to a newly installed printer but the print jobs never print. What should the technician do to resolve the issue?

    • The printer is connected to the wrong port. Modify the port.
    • Check the vibration of the crystals.
    • Configure the printer for duplex printing.
    • Power cycle the printer.
    • Update the OS.

42. Users have noticed that the colors on their printed documents are different from the colors that they see on their computer screens. What should the technician do to resolve the issue?

    • Calibrate the printer.
    • Install a USB hub.
    • Configure the printer for duplex printing.
    • Power cycle the printer.
    • Update the OS.

43. A technician has just completed a preventive maintenance on the department printer. Users are now complaining that the printer is no longer available. What should the technician do to resolve the issue?

    • Check that the printer is plugged into a power source.
    • Connect the printer using wireless.
    • Configure the printer for duplex printing.
    • Power cycle the printer.
    • Update the OS.

44. Employees of a small business are complaining that the printer is printing faded images. What should the technician do to resolve the issue?

    • Replace the toner cartridge.
    • Update the BIOS.
    • Reset the page counter.
    • Clean the printer.
    • Check the vibration of the crystals.

45. A user is complaining that the printer is printing pages with no image on them. What should the technician do to resolve the issue?

    • Replace the toner cartridge.
    • Update the OS.
    • Reset the page counter.
    • Clean the printer.
    • Check the vibration of the crystals.

46. A manager is complaining that the toner is coming off the pages printed by the laser printer. What should the technician do to resolve the issue?

    • Replace the fuser.
    • Update the OS.
    • Reset the page counter.
    • Clean the printer.
    • Check the vibration of the crystals.

47. A manager is complaining that the toner is coming off the pages printed by the laser printer. What should the technician do to resolve the issue?

    • Replace the fuser.
    • Power cycle the printer.
    • Reset the page counter.
    • Clean the printer.
    • Check the vibration of the crystals.

48. In Windows 8, what must be configured to enable one user to share a USB connected printer with another user on the same network?

    • File and printer sharing
    • Windows Defender
    • virtualization option in BIOS
    • Windows firewall
    • IEEE 802.11