Refer to the exhibit. A user PC has successfully transmitted packets to www.cisco.com. Which IP address does the user PC target in order to forward its data off the local…
The global configuration command ip default-gateway 172.16.100.1 is applied to a switch. What is the effect of this command? The switch will have a management interface with the address 172.16.100.1.…
Match the commands to the correct actions. (Not all options are used.) For more Questions and Answers: CCNA 1 v7 – ITN v7.02 – Modules 8 – 10: Communicating Between Networks…
Which two types of IPv6 messages are used in place of ARP for address resolution? anycast broadcast echo reply echo request neighbor solicitation neighbor advertisement Answers Explanation & Hints: IPv6…
Refer to the exhibit. The exhibit shows a small switched network and the contents of the MAC address table of the switch. PC1 has sent a frame addressed to PC3.…
A network technician issues the arp -d * command on a PC after the router that is connected to the LAN is reconfigured. What is the result after this command…
What action will occur if a switch receives a frame with the destination MAC address 01:00:5E:00:00:D9? The switch forwards it out all ports except the ingress port. The switch does…
What action will occur if a switch receives a frame with the destination MAC address FF:FF:FF:FF:FF:FF? The switch forwards it out all ports except the ingress port. The switch shares…
What OSI physical layer term describes the amount of time, including delays, for data to travel from one point to another? latency fiber-optic cable air copper cable Explanation & Hint:…
What OSI physical layer term describes the measure of the transfer of bits across a medium over a given period of time? throughput bandwidth latency goodput Explanation & Hint: The…
Refer to the exhibit. The PC is connected to the console port of the switch. All the other connections are made through FastEthernet links. Which types of UTP cables can…
Refer to the exhibit. What is wrong with the displayed termination? The woven copper braid should not have been removed. The wrong type of connector is being used. The untwisted…
Which two statements describe features or functions of the logical link control sublayer in Ethernet standards? (Choose two.) Logical link control is implemented in software. Logical link control is specified…
Which advantage does the store-and-forward switching method have compared with the cut-through switching method? collision detecting frame error checking faster frame forwarding frame forwarding using IPv4 Layer 3 and 4…
A network administrator is connecting two modern switches using a straight-through cable. The switches are new and have never been configured. Which three statements are correct about the final result…
Refer to the exhibit. What is the destination MAC address of the Ethernet frame as it leaves the web server if the final destination is PC1? 00-60-2F-3A-07-AA 00-60-2F-3A-07-BB 00-60-2F-3A-07-CC 00-60-2F-3A-07-DD…
What are three ways that media access control is used in networking? (Choose three.) Ethernet utilizes CSMA/CD. Media access control provides placement of data frames onto the media. Contention-based access…
Which media communication type does not require media arbitration in the data link layer? deterministic half-duplex full-duplex controlled access Answers Explanation & Hints: Half-duplex communication occurs when both devices can…
A network team is comparing physical WAN topologies for connecting remote sites to a headquarters building. Which topology provides high availability and connects some, but not all, remote sites? mesh…
With the use of unshielded twisted-pair copper wire in a network, what causes crosstalk within the cable pairs? the magnetic field around the adjacent pairs of wire the use of…