What two pieces of information are displayed in the output of the show ip interface brief command? (Choose two.)

  • Post author:
  • Post category:Blog
  • Post comments:0 Comments
  • Post last modified:June 12, 2024
  • Reading time:1 mins read

What two pieces of information are displayed in the output of the show ip interface brief command? (Choose two.) speed and duplex settings MAC addresses next-hop addresses interface descriptions IP addresses Layer…

Continue ReadingWhat two pieces of information are displayed in the output of the show ip interface brief command? (Choose two.)

A group of Windows PCs in a new subnet has been added to an Ethernet network. When testing the connectivity, a technician finds that these PCs can access local network resources but not the Internet resources. To troubleshoot the problem, the technician wants to initially confirm the IP address and DNS configurations on the PCs, and also verify connectivity to the local router. Which three Windows CLI commands and utilities will provide the necessary information? (Choose three.)

  • Post author:
  • Post category:Blog
  • Post comments:0 Comments
  • Post last modified:June 12, 2024
  • Reading time:2 mins read

A group of Windows PCs in a new subnet has been added to an Ethernet network. When testing the connectivity, a technician finds that these PCs can access local network…

Continue ReadingA group of Windows PCs in a new subnet has been added to an Ethernet network. When testing the connectivity, a technician finds that these PCs can access local network resources but not the Internet resources. To troubleshoot the problem, the technician wants to initially confirm the IP address and DNS configurations on the PCs, and also verify connectivity to the local router. Which three Windows CLI commands and utilities will provide the necessary information? (Choose three.)

Match the application protocols to the correct transport protocols.

  • Post author:
  • Post category:Blog
  • Post comments:0 Comments
  • Post last modified:June 12, 2024
  • Reading time:2 mins read

Match the application protocols to the correct transport protocols. Explanation & Hint: DHCP (Dynamic Host Configuration Protocol) - Typically uses UDP. DHCP is used for dynamic IP addressing and operates…

Continue ReadingMatch the application protocols to the correct transport protocols.

Data is being sent from a source PC to a destination server. Which three statements correctly describe the function of TCP or UDP in this situation? (Choose three.)

  • Post author:
  • Post category:Blog
  • Post comments:0 Comments
  • Post last modified:June 12, 2024
  • Reading time:2 mins read

Data is being sent from a source PC to a destination server. Which three statements correctly describe the function of TCP or UDP in this situation? (Choose three.) TCP is…

Continue ReadingData is being sent from a source PC to a destination server. Which three statements correctly describe the function of TCP or UDP in this situation? (Choose three.)

A network administrator notices that some newly installed Ethernet cabling is carrying corrupt and distorted data signals. The new cabling was installed in the ceiling close to fluorescent lights and electrical equipment. Which two factors may interfere with the copper cabling and result in signal distortion and data corruption? (Choose two.)

  • Post author:
  • Post category:Blog
  • Post comments:0 Comments
  • Post last modified:June 12, 2024
  • Reading time:2 mins read

A network administrator notices that some newly installed Ethernet cabling is carrying corrupt and distorted data signals. The new cabling was installed in the ceiling close to fluorescent lights and…

Continue ReadingA network administrator notices that some newly installed Ethernet cabling is carrying corrupt and distorted data signals. The new cabling was installed in the ceiling close to fluorescent lights and electrical equipment. Which two factors may interfere with the copper cabling and result in signal distortion and data corruption? (Choose two.)

A network administrator is designing the layout of a new wireless network. Which three areas of concern should be accounted for when building a wireless network? (Choose three.)

  • Post author:
  • Post category:Blog
  • Post comments:0 Comments
  • Post last modified:June 12, 2024
  • Reading time:1 mins read

A network administrator is designing the layout of a new wireless network. Which three areas of concern should be accounted for when building a wireless network? (Choose three.) mobility options…

Continue ReadingA network administrator is designing the layout of a new wireless network. Which three areas of concern should be accounted for when building a wireless network? (Choose three.)

What mechanism is used by a router to prevent a received IPv4 packet from traveling endlessly on a network?

  • Post author:
  • Post category:Blog
  • Post comments:0 Comments
  • Post last modified:June 12, 2024
  • Reading time:3 mins read

What mechanism is used by a router to prevent a received IPv4 packet from traveling endlessly on a network? It checks the value of the TTL field and if it…

Continue ReadingWhat mechanism is used by a router to prevent a received IPv4 packet from traveling endlessly on a network?

Which range of link-local addresses can be assigned to an IPv6-enabled interface?​

  • Post author:
  • Post category:Blog
  • Post comments:0 Comments
  • Post last modified:June 12, 2024
  • Reading time:1 mins read

Which range of link-local addresses can be assigned to an IPv6-enabled interface?​ FE80::/10 FDEE::/7​ FF00::/8​ FEC0::/10​ Explanation: Link-local addresses are in the range of FE80::/10 to FEBF::/10. The original IPv6…

Continue ReadingWhich range of link-local addresses can be assigned to an IPv6-enabled interface?​

A client is using SLAAC to obtain an IPv6 address for its interface. After an address has been generated and applied to the interface, what must the client do before it can begin to use this IPv6 address?

  • Post author:
  • Post category:Blog
  • Post comments:0 Comments
  • Post last modified:June 12, 2024
  • Reading time:2 mins read

A client is using SLAAC to obtain an IPv6 address for its interface. After an address has been generated and applied to the interface, what must the client do before…

Continue ReadingA client is using SLAAC to obtain an IPv6 address for its interface. After an address has been generated and applied to the interface, what must the client do before it can begin to use this IPv6 address?

What is the subnet ID associated with the IPv6 address 2001:DA48:FC5:A4:3D1B::1/64?

  • Post author:
  • Post category:Blog
  • Post comments:0 Comments
  • Post last modified:June 12, 2024
  • Reading time:1 mins read

What is the subnet ID associated with the IPv6 address 2001:DA48:FC5:A4:3D1B::1/64? 2001:DA48::/64​ 2001::/64 2001:DA48:FC5:A4::/64​ 2001:DA48:FC5::A4:/64​ Explanation: The /64 represents the network and subnet IPv6 fields. The fourth field of hexadecimal…

Continue ReadingWhat is the subnet ID associated with the IPv6 address 2001:DA48:FC5:A4:3D1B::1/64?

What happens when the transport input ssh command is entered on the switch vty lines?

  • Post author:
  • Post category:Blog
  • Post comments:0 Comments
  • Post last modified:June 12, 2024
  • Reading time:1 mins read

What happens when the transport input ssh command is entered on the switch vty lines? The switch requires a username/password combination for remote access. The SSH client on the switch is enabled.…

Continue ReadingWhat happens when the transport input ssh command is entered on the switch vty lines?

A new network administrator has been asked to enter a banner message on a Cisco device. What is the fastest way a network administrator could test whether the banner is properly configured?

  • Post author:
  • Post category:Blog
  • Post comments:0 Comments
  • Post last modified:June 12, 2024
  • Reading time:2 mins read

A new network administrator has been asked to enter a banner message on a Cisco device. What is the fastest way a network administrator could test whether the banner is…

Continue ReadingA new network administrator has been asked to enter a banner message on a Cisco device. What is the fastest way a network administrator could test whether the banner is properly configured?

Which two functions are performed at the MAC sublayer of the OSI Data Link Layer to facilitate Ethernet communication? (Choose two.)

  • Post author:
  • Post category:Blog
  • Post comments:0 Comments
  • Post last modified:June 12, 2024
  • Reading time:6 mins read

Which two functions are performed at the MAC sublayer of the OSI Data Link Layer to facilitate Ethernet communication? (Choose two.) ---> Case A handles communication between upper layer networking…

Continue ReadingWhich two functions are performed at the MAC sublayer of the OSI Data Link Layer to facilitate Ethernet communication? (Choose two.)

A client packet is received by a server. The packet has a destination port number of 143. What service is the client requesting?

  • Post author:
  • Post category:Blog
  • Post comments:0 Comments
  • Post last modified:June 12, 2024
  • Reading time:1 mins read

A client packet is received by a server. The packet has a destination port number of 143. What service is the client requesting? Telnet SSH IMAP FTP Explanation & Hint:…

Continue ReadingA client packet is received by a server. The packet has a destination port number of 143. What service is the client requesting?

When a computer is pinging another computer for the first time, what type of message does it place on the network to determine the MAC address of the other device?

  • Post author:
  • Post category:Blog
  • Post comments:0 Comments
  • Post last modified:June 12, 2024
  • Reading time:1 mins read

When a computer is pinging another computer for the first time, what type of message does it place on the network to determine the MAC address of the other device?…

Continue ReadingWhen a computer is pinging another computer for the first time, what type of message does it place on the network to determine the MAC address of the other device?

Which two TCP header fields are used to confirm receipt of data? (Choose two.)

  • Post author:
  • Post category:Blog
  • Post comments:0 Comments
  • Post last modified:June 12, 2024
  • Reading time:1 mins read

Which two TCP header fields are used to confirm receipt of data? (Choose two.) FCS sequence number acknowledgment number preamble checksum Explanation: Together the TCP sequence number and acknowledgment number…

Continue ReadingWhich two TCP header fields are used to confirm receipt of data? (Choose two.)

What TCP mechanism is used to enhance performance by allowing a device to continuously send a steady stream of segments as long as the device is also receiving necessary acknowledgements?

  • Post author:
  • Post category:Blog
  • Post comments:0 Comments
  • Post last modified:June 12, 2024
  • Reading time:2 mins read

What TCP mechanism is used to enhance performance by allowing a device to continuously send a steady stream of segments as long as the device is also receiving necessary acknowledgements?…

Continue ReadingWhat TCP mechanism is used to enhance performance by allowing a device to continuously send a steady stream of segments as long as the device is also receiving necessary acknowledgements?

A host device needs to send a large video file across the network while providing data communication to other users. Which feature will allow different communication streams to occur at the same time, without having a single data stream using all available bandwidth?

  • Post author:
  • Post category:Blog
  • Post comments:0 Comments
  • Post last modified:June 12, 2024
  • Reading time:2 mins read

A host device needs to send a large video file across the network while providing data communication to other users. Which feature will allow different communication streams to occur at…

Continue ReadingA host device needs to send a large video file across the network while providing data communication to other users. Which feature will allow different communication streams to occur at the same time, without having a single data stream using all available bandwidth?

A client is establishing a TCP session with a server. How is the acknowledgment number in the response segment to the client determined?

  • Post author:
  • Post category:Blog
  • Post comments:0 Comments
  • Post last modified:June 12, 2024
  • Reading time:2 mins read

A client is establishing a TCP session with a server. How is the acknowledgment number in the response segment to the client determined? The acknowledgment number field uses a random…

Continue ReadingA client is establishing a TCP session with a server. How is the acknowledgment number in the response segment to the client determined?