Match the correct API with its function within the Windows 10 environment.

  • Post author:
  • Post category:Blog
  • Post comments:0 Comments
  • Post last modified:June 12, 2024
  • Reading time:2 mins read

Match the correct API with its function within the Windows 10 environment. Explanation & Hint: Windows APIs: These are the interfaces provided by Microsoft that allow developers to interact with…

Continue ReadingMatch the correct API with its function within the Windows 10 environment.

Match the drive status indicators in the Disk Management utility with their description. (Not all options are used.)

  • Post author:
  • Post category:Blog
  • Post comments:0 Comments
  • Post last modified:June 12, 2024
  • Reading time:2 mins read

Match the drive status indicators in the Disk Management utility with their description. (Not all options are used.) Explanation & Hint: Healthy: Indicates a volume that is functioning properly with…

Continue ReadingMatch the drive status indicators in the Disk Management utility with their description. (Not all options are used.)

Match the RAID technology terms to the description. (Not all options are used.)

  • Post author:
  • Post category:Blog
  • Post comments:0 Comments
  • Post last modified:June 12, 2024
  • Reading time:2 mins read

Match the RAID technology terms to the description. (Not all options are used.) Explanation & Hints: Double parity is connected to "provides fault tolerance for up to two failed drives".…

Continue ReadingMatch the RAID technology terms to the description. (Not all options are used.)

Match the common printer configuration options to the correct descriptions. (Not all options are used.)

  • Post author:
  • Post category:Blog
  • Post comments:0 Comments
  • Post last modified:June 12, 2024
  • Reading time:2 mins read

Match the common printer configuration options to the correct descriptions. (Not all options are used.) Answers Explanation & Hints: Place the options in the following order: Print quality Draft, normal,…

Continue ReadingMatch the common printer configuration options to the correct descriptions. (Not all options are used.)

Match the Internet Options to the descriptions used to configure Microsoft Internet Explorer. (Not all options are used.)

  • Post author:
  • Post category:Blog
  • Post comments:0 Comments
  • Post last modified:June 12, 2024
  • Reading time:1 mins read

Match the Internet Options to the descriptions used to configure Microsoft Internet Explorer. (Not all options are used.) For more Questions and Answers: ITE 8 - IT Essentials 8.0 Chapter…

Continue ReadingMatch the Internet Options to the descriptions used to configure Microsoft Internet Explorer. (Not all options are used.)

Match the environments in the four-tier development environment structure to the description.

  • Post author:
  • Post category:Blog
  • Post comments:0 Comments
  • Post last modified:June 12, 2024
  • Reading time:3 mins read

Match the environments in the four-tier development environment structure to the description. Answers Explanation & Hint: Here’s an explanation for each of the environments in the four-tier development environment structure…

Continue ReadingMatch the environments in the four-tier development environment structure to the description.

A set of changes done to any program or application with the aim of updating, fixing or improving it is often referred to as what?

  • Post author:
  • Post category:Blog
  • Post comments:0 Comments
  • Post last modified:June 12, 2024
  • Reading time:2 mins read

A set of changes done to any program or application with the aim of updating, fixing or improving it is often referred to as what? A hack A fix An install…

Continue ReadingA set of changes done to any program or application with the aim of updating, fixing or improving it is often referred to as what?

Refer to the exhibit. A network administrator is configuring RT1 for inter-VLAN routing. The switch is configured correctly and is functional. Host1, Host2, and Host3 cannot communicate with each other. Based on the router configuration, what is causing the problem?

  • Post author:
  • Post category:Blog
  • Post comments:0 Comments
  • Post last modified:June 12, 2024
  • Reading time:2 mins read

Refer to the exhibit. A network administrator is configuring RT1 for inter-VLAN routing. The switch is configured correctly and is functional. Host1, Host2, and Host3 cannot communicate with each other.…

Continue ReadingRefer to the exhibit. A network administrator is configuring RT1 for inter-VLAN routing. The switch is configured correctly and is functional. Host1, Host2, and Host3 cannot communicate with each other. Based on the router configuration, what is causing the problem?

Refer to the exhibit. A network administrator needs to configure router-on-a-stick for the networks that are shown. How many subinterfaces will have to be created on the router if each VLAN that is shown is to be routed and each VLAN has its own subinterface?

  • Post author:
  • Post category:Blog
  • Post comments:0 Comments
  • Post last modified:June 12, 2024
  • Reading time:2 mins read

Refer to the exhibit. A network administrator needs to configure router-on-a-stick for the networks that are shown. How many subinterfaces will have to be created on the router if each…

Continue ReadingRefer to the exhibit. A network administrator needs to configure router-on-a-stick for the networks that are shown. How many subinterfaces will have to be created on the router if each VLAN that is shown is to be routed and each VLAN has its own subinterface?

Refer to the exhibit. The network administrator wants to configure Switch1 to allow SSH connections and prohibit Telnet connections. How should the network administrator change the displayed configuration to satisfy the requirement?

  • Post author:
  • Post category:Blog
  • Post comments:0 Comments
  • Post last modified:June 12, 2024
  • Reading time:3 mins read

Refer to the exhibit. The network administrator wants to configure Switch1 to allow SSH connections and prohibit Telnet connections. How should the network administrator change the displayed configuration to satisfy…

Continue ReadingRefer to the exhibit. The network administrator wants to configure Switch1 to allow SSH connections and prohibit Telnet connections. How should the network administrator change the displayed configuration to satisfy the requirement?

Refer to the exhibit. A network administrator has configured router CiscoVille with the above commands to provide inter-VLAN routing. What type of port will be required on a switch that is connected to Gi0/0 on router CiscoVille to allow inter-VLAN routing?

  • Post author:
  • Post category:Blog
  • Post comments:0 Comments
  • Post last modified:June 12, 2024
  • Reading time:2 mins read

Refer to the exhibit. A network administrator has configured router CiscoVille with the above commands to provide inter-VLAN routing. What type of port will be required on a switch that…

Continue ReadingRefer to the exhibit. A network administrator has configured router CiscoVille with the above commands to provide inter-VLAN routing. What type of port will be required on a switch that is connected to Gi0/0 on router CiscoVille to allow inter-VLAN routing?

Refer to the exhibit. A network administrator has configured R1 as shown. When the administrator checks the status of the serial interface, the interface is shown as being administratively down. What additional command must be entered on the serial interface of R1 to bring the interface up?

  • Post author:
  • Post category:Blog
  • Post comments:0 Comments
  • Post last modified:June 12, 2024
  • Reading time:2 mins read

Refer to the exhibit. A network administrator has configured R1 as shown. When the administrator checks the status of the serial interface, the interface is shown as being administratively down.…

Continue ReadingRefer to the exhibit. A network administrator has configured R1 as shown. When the administrator checks the status of the serial interface, the interface is shown as being administratively down. What additional command must be entered on the serial interface of R1 to bring the interface up?

Refer to the exhibit. A network administrator is verifying the configuration of inter-VLAN routing. Users complain that PC2 cannot communicate with PC1. Based on the output, what is the possible cause of the problem?

  • Post author:
  • Post category:Blog
  • Post comments:0 Comments
  • Post last modified:June 12, 2024
  • Reading time:2 mins read

Refer to the exhibit. A network administrator is verifying the configuration of inter-VLAN routing. Users complain that PC2 cannot communicate with PC1. Based on the output, what is the possible…

Continue ReadingRefer to the exhibit. A network administrator is verifying the configuration of inter-VLAN routing. Users complain that PC2 cannot communicate with PC1. Based on the output, what is the possible cause of the problem?

Refer to the exhibit. A network administrator has configured router CiscoVille with the above commands to provide inter-VLAN routing. What command will be required on a switch that is connected to the Gi0/0 interface on router CiscoVille to allow inter-VLAN routing?​

  • Post author:
  • Post category:Blog
  • Post comments:0 Comments
  • Post last modified:June 12, 2024
  • Reading time:2 mins read

Refer to the exhibit. A network administrator has configured router CiscoVille with the above commands to provide inter-VLAN routing. What command will be required on a switch that is connected…

Continue ReadingRefer to the exhibit. A network administrator has configured router CiscoVille with the above commands to provide inter-VLAN routing. What command will be required on a switch that is connected to the Gi0/0 interface on router CiscoVille to allow inter-VLAN routing?​

Refer to the exhibit. What is the cause of the error that is displayed in the configuration of inter-VLAN routing on router CiscoVille?

  • Post author:
  • Post category:Blog
  • Post comments:0 Comments
  • Post last modified:June 12, 2024
  • Reading time:2 mins read

Refer to the exhibit. What is the cause of the error that is displayed in the configuration of inter-VLAN routing on router CiscoVille? The gig0/0 interface does not support inter-VLAN…

Continue ReadingRefer to the exhibit. What is the cause of the error that is displayed in the configuration of inter-VLAN routing on router CiscoVille?