H13-611 : HCNA-Storage-BSSN (Huawei Certified Network Associate – Building the Structure of Storage Network) : Part 03
-
Which of the following statements about HUAWEI OceanStor V3 SmartTier dynamic storage tiering technology is NOT true?
- The SmartTier automatically and dynamically matches data from different activity levels with storage media of different characteristics.
- The SmartTier calculates and analyzes the activity level of data.
- Data statistics, analysis, and relocation activities of the SmartTier affect service continuity and data availability.
- The SmartTier data relocation activities are based on configured policies.
-
Statement 1: Port zoning is preferred for zoning a FC switch when there are a lot of changes to the patch points.
Statement 2: Alias zoning is a user friendly version of soft zoning.
- Statements 1 and 2 are false
- Statement 1 is true; Statement 2 is false
- Statement 1 and 2 are true
- Statement 1 is false; Statement 2 is true
-
Select the correct statements about the structure and functions of the hard disk components. (Choose all that apply.)
- Disk platter is responsible of storing data in binary form.
- The disk connector is responsible of connection and rotation of the platter.
- The spindle is responsible for sending commands to the disk head.
- The actuator is responsible of moving the Read/Write arm.
-
What statement about the SATA and SAS technologies is true?
- Both SATA and SAS are intelligent protocols with intelligent devices.
- Both use full-duplex communication.
- Both use serial communication.
- SATA and SAS support the same maximum number of devices on the bus.
-
Which of the following occurs after multipathing software is installed on a host? (Choose all that apply.)
- Improves link reliability and prevents the failure of a single link from causing a system failure.
- Sets up connection between a storage device and the host.
- Avoids logical errors from occurring in the operating system as a result of multiple reachable paths to the same LUN.
- Maps a LUN to the host.
-
Statement 1: We have a RAID5 protected group of disks. The protection level increases if we add more disks to the group.
Statement 2: With a RAID 10 set the number of disks must be greater than 8 to always survive a dual disk failure.
- Statement 1 is true and statement 2 is false.
- Statements 1 and 2 are both true.
- Both statements 1 and 2 are false.
- Statement 1 is false and statement 2 is true.
-
What statement is true?
- IT managers should determine the retention period for data.
- Information Life Cycle management must be based on the costs for the storage hardware.
- Storing a lot of random, unstructured data can become a management problem for many companies.
- Technology is the main factor that decides which disaster recovery method will be implemented.
-
Grid storage employs the combination of large scale serial distributed storage to provide even distribution of storage across all nodes.
- FALSE
- TRUE
-
When the RPO is minutes instead of hours the best backup method is traditional Tape backup.
- TRUE
- FALSE
-
Which of the following methods provides the best RTO?
- Replication
- Disk-To-Tape
- Virtual Tape Library
- Disk-To-Disk-To-Tape
-
Statement 1: Disaster Recovery plans eliminate the need for backups on tape or disk.
Statement 2: With the design of the DR plan one should always assume the worst possible scenario.
- Statement 1 and 2 are true.
- Statement 1 and 2 are false.
- Statement 1 is true; Statement 2 is false.
- Statement 1 is false; Statement 2 is true.
-
The restore time objective (RTO) specifies the time needed to recover the data and servers after a disaster has occurred.
- FALSE
- TRUE
-
Statement 1: Virtual Tape Libraries allow for a highly scalable backup strategy as storage can be added later.
Statement 2: Virtual Tape Libraries should be used when remote datacenters are NOT available.
- Both statements 1 and 2 are false
- Statement 1 is false and statement 2 is true
- Statements 1 and 2 are both true
- Statement 1 is true and statement 2 is false.
-
Statement 1: If possible it is always advised to make only Full Backups.
Statement 2: LAN free backups typically run slower than LAN based backups.
- Statements 1 and 2 are both true.
- Both statements 1 and 2 are false.
- Statement 1 is true and statement 2 is false.
- Statement 1 is false and statement 2 is true.
-
Which of the following are correct steps in a LAN based backup job? (Choose all that apply.)
- Agent on application server sends data to the backup device.
- Backup server sends a “start-backup” command to the backup device.
- Agent on application server sends data to backup media server.
- Backup media server sends data to the backup device.
-
Given this scenario. A company wants replication of data between two data centers that are 2000 km apart. Which replication method is most recommended?
- Synchronous but ONLY if the link is a high speed 8 Gb/s fiber optical connection
- Asynchronous
- Synchronous
- Both Asynchronous and Synchronous will work
-
Statement 1: Every time a tape is used to restore data, some data will be lost.
Statement 2: Backup strategies that use tape as backup media typically have a high RTO.
- Statements 1 and 2 are true.
- Statements 1 and 2 are false.
- Statement 1 is false; Statement 2 is true.
- Statement 1 is true; Statement 2 is false.
-
HyperReplication for HUAWEI OceanStor V3 can use FC links between the data centers. ISCSI links are not supported.
- TRUE
- FALSE
-
Which of the following statements is incorrect?
- Physical volumes reside on the lowest layer in the logical volume manager. Logical volumes and volume groups are dependent on physical volumes.
- A logical volume can reside on multiple physical disks. Data storage can be physically discontinuous.
- Multiple volume groups can be created on the space of a logical volume.
- A volume group is built on physical volumes. A volume group can contain one physical volume group or multiple physical volumes.
-
In a Red Hat Linux 5 operating system, which command is used to mount the sdb5 in the dev directory to the sdb5 in the mnt directory?
- df/dev/sdb5/mnt/sdb5
- in/dev/sdb5/mnt/sdb5
- cat/dev/sdb5/mnt/sdb5
- mount/dev/sdb5/mnt/sdb5
Subscribe
0 Comments
Newest