H12-224 : HCNP-R&S Fast Track (Huawei Certified Network Professional – Routing & Switching Fast Track) : Part 26

  1. The system can perform ACL rule matching only based on the configuration order of rules.

    • True
    • False 
  2. If different routing protocols run on different networks and these networks need to share routing information, route importing can be used.

    • True 
    • False
  3. If the peer default-route-advertise command is used to advertise a default BGP route to peers, how will this operation affect the local BGP routing table?

    • An inactive default route will be generated in the local BGP routing table and this route will not be delivered to the IP routing table.
    • An active default route will be generated in the local BGP routing table and this route will be delivered to the IP routing table.
    • The local BGP routing table will not be affected and no default route will be generated in the local BGP routing table. 
    • A default route will be generated in the local BGP routing table and whether to deliver this route to the IP routing table depends on route selection results.
  4. Which of the following technologies can reduce the scale of broadcast domain?

    • VLAN 
    • Trunk
    • RARP
    • STP
  5. Which of the following are multicast routing protocols? (Choose three.)

    • DVMRP
    • PIM-DM
    • F OSPF
    • F PIM-SM 
  6. Which switching technology reduces the size of broadcast domain?

    • VLAN 
    • Trunk
    • RARP
    • STP
  7. According to the OSI reference model, Layer 2 LAN switch operates at Q.

    • physical layer
    • data link layer 
    • network layer
    • application layer
  8. Layer 3 switch has layer 2 capability as well as layer 3 routing capability.

    • True 
    • False
  9. The default-route originate command in the RIP protocol is used to advertise a default RIP route to peers. By using this command, which of the following attributes can be set for the default route?

    • Tag
    • Cost 
    • Interface
    • Nexthop
  10. Which of the following route selection tools is used in multiple routing protocols, can be configured with match conditions, and consists of if-match and apply clauses?

    • AS-path-filter
    • IP-p ref ix
    • C Route-policy 
    • Community-filter
  11. You cannot set an aging time for the blacklist of the USG.

    • TRUE
    • FALSE 
  12. Which of the following routes match this ACL filter? (Choose two.)

    H12-224 HCNP-R&S Fast Track (Huawei Certified Network Professional – Routing & Switching Fast Track) Part 26 Q12 028
    H12-224 HCNP-R&S Fast Track (Huawei Certified Network Professional – Routing & Switching Fast Track) Part 26 Q12 028
    •  1.1.1.1/32 
    • 1.1.2.1/32
    • 1.1.3.1/32 
    • 1.1.4.1/32
  13. OSPF supports two authentication modes: area authentication and interface authentication.

    These two modes cannot be configured at the same time.

    • TRUE
    • FALSE
  14. Which of the following statements is false?

    • A Router-LSA describes the local link state information of a router.
    • A Network-ISA describes the link state information of a broadcast network or an NBMA network segment.
    • A virtual link is a virtual adjacency in the backbone area (Area 0).
    • An AS-external-ISA describes the means to reach an ASBR. 
  15. Which of the following statements about the Reverse Path Forwarding (RPF) mechanism are true? (Choose two.)

    • Multicast RPF does not depend on unicast routing.
    • All multicast protocols adopt the RPF mechanism.
    • A router discards the received multicast packets if the packets fail the RPF check.
    • The RPF mechanism has two functions: 1. It prevents multicast routing loops; 2. It avoids forwarding redundant multicast data packets.
  16. What are the functions of route filtering? (Choose three.)

    • Avoids sub-optimal routes generated in route importing.
    • Avoids routing loops.
    • Affects route selection by changing route attributes.
    • Implements accurate route importing and controls route advertisement. 
  17. The preceding information is generated after a router receives a Report message from group 225.0.0.1 through Ethernet 6/1/0.

    H12-224 HCNP-R&S Fast Track (Huawei Certified Network Professional – Routing & Switching Fast Track) Part 26 Q17 029
    H12-224 HCNP-R&S Fast Track (Huawei Certified Network Professional – Routing & Switching Fast Track) Part 26 Q17 029

    Which type of Report message will not be processed by the router?

    • IS_IN
    • ALLOW
    • BLOCK 
    • TO_IN
  18. Which of the following attacks are prevented after an IP address and MAC address are bound on the USG? (Choose two.)

    • IP address spoofing
    • MAC address spoofing
    • DoS attack
    • DDoS attack
  19. An IP network can provide various packet forwarding services. Users are concerned about which of the following during packet forwarding? (Choose three.)

    • Throughput
    • Delay
    • Cost
    • Loss of packet
  20. How many hosts are available per subnet if you apply a /21 mask to the class B network?

    • 510
    • 512
    • 1022
    • 2046
Subscribe
Notify of
guest
0 Comments
Newest
Oldest Most Voted
Inline Feedbacks
View all comments