13.3.4.6 Lab – Configure Windows Firewall Answers Full 100% 2023 2024

Lab – Configure Windows Firewall (Answers Version)

Answers Note: Red font color or gray highlights indicate text that appears in the Answers copy only.

Introduction

In this lab, you will explore the Windows Firewall and configure some advanced settings.

Recommended Equipment

• Two Windows PCs directly connected or connected over the network
• Computers must be in the same workgroup and network

Answers Note: Set the following computer configurations:

• Turn on Network Discovery is on both computers.
• Create User accounts on PC-1 and PC-2 and add them both to the Administrators group. For example: on PC-1 and PC-2 create ITEuser accounts on both PCs. Make sure to assign a password to the accounts.
• On PC-2, turn off Use Sharing Wizard (Recommended).

• Windows 8.1 and 10: Open File Explorer > click View > click Options > click Change folder and search options > View tab, and then uncheck Use Sharing Wizard (Recommended) > click OK.
• Windows 7: Click Start > click Computer > click Tools > click Folder Options > View tab, and then uncheck Use Sharing Wizard (Recommended) > click OK.

Instructions

Step 1:Create and share a folder on PC-1.

1. Log on to PC-1 as a member of the administrator group. Ask your Answers for the user name and password.
2. Verify that you can ping PC-2.
3. On PC-1, right-click the desktop, select New > Folder. Name the folder Cisco.
4. Right-click the Cisco folder, and then select Properties > Sharing > Advanced Sharing. The Advanced Sharing window opens. Click Share this folder and use the default name Cisco. Click OK. Close the Cisco Properties window.

Step 2:Use File Explorer or Windows Explorer to view PC-1’s shared folder.

1. Log on to PC-2 as a member of the administrator group. Ask your Answers for the user name and password.
2. Open File Explorer or Windows Explorer. In the left pane, under Network, expand PC-1.

Question:

Under PC-1, are you able to see the shared folder Cisco?

Yes

Note: If you answered no, ask the Answers for help.

3. Close File Explorer or Windows Explorer.

Step 3:Open Windows Firewall on PC-1.

Note: Use PC-1 for the rest of the lab unless otherwise stated.

1. To open the Windows Firewall window, click Control Panel > System and Security > Windows Defender Firewall or Windows Firewall.
2. The normal state for the Windows Firewall is On.

Question:

What are the benefits of Windows Firewall?

Windows Firewall can help prevent hackers or malicious software from gaining access to your computer through the internet or a network.

Step 4:Investigate the Windows Firewall Allowed Programs feature.

1. Click Allow an app or feature through Windows Defender Firewall. or Allow apps to communicate through Windows Firewall.
2. The Allowed apps window opens. Programs and services that Windows Firewall is not blocking will be listed with a check mark. Click What are the risks of allowing an app to communicate? or What are the risks of allowing a program to communicate?

Note: You can add applications to this list. This may be necessary if you have an application that requires outside communications but for some reason the Windows Firewall cannot perform the configuration automatically.

Creating too many exceptions in your Programs and Services file can have negative consequences.

Describe a negative consequence of having too many exceptions.

Answers will vary. Exceptions for a program to communicate through the Windows Firewall are like opening a hole in the firewall. Attackers use software that scans the internet looking for computers with many exceptions and open ports.

3. Close Windows Help and Support window.

Step 5:Configure the Windows Firewall Allowed apps feature.

1. In the Allowed apps window, click Change settings. Remove the check mark from File and Printer Sharing. Click OK.
2. On PC-2, using File Explorer or Windows Explorer, attempt to open the network connect to PC-1.

Question:

Can you connect to PC-1 and view the Cisco shared folder?

No

Did you receive an error message on PC-2? If so, what was the Error message?

Yes. Windows cannot access \\PC-1.

3. Close all open windows on PC-2.
4. On PC-1, add a check mark to File and Printer Sharing. Click OK.

Note: You should be able to add the check mark without needing to click Change settings.

5. On PC-2, re-open File Explorer or Windows Explorer and attempt to connect to PC-1.

Question:

Can you connect to computer 1? Explain.

Yes, because PC-1’s File and Printer Sharing is not being blocked by the firewall any longer.

6. Close all open windows on PC-2 and Log off .
7. Close all windows on PC-1.

Step 6:Explore Advanced Security features in Windows Firewall.

Note: Use PC-1 for the rest of this lab.

1. Click Control Panel > in Small icons view, Administrative Tools > Windows Defender Firewall with Advanced Security or Windows Firewall with Advanced Security.
2. In the left panel of the Windows Defender Firewall with Advanced Security or Windows Firwall with Advanced Security window, you can select items to configure Inbound Rules, Outbound Rules, or Connection Security Rules. You can also click Monitoring to view the status of configured rules. Click Inbound Rules.
3. In the middle panel, scroll down until you find the inbound rule named Files and Printer Sharing (Echo Request – ICMPv4-In). Right-click the rule and select Properties, then select the Advanced tab.
4. The Advanced tab displays the profile(s) used by the computer. Click Customize in the Interface Types area of the window.
5. The Customize Interface Types window displays the different connections configured for your computer. Leave All interface types selected, then click OK.
6. Click the Programs and Services tab. In the Services section, click Settings….

List the short name of four services that are available in the Customize Service Settnigs window.

Answer will vary. AeLookupSvc, Appinfo, ALG, AppMgmt, etc.

7. Click Cancel to close the Customize Service Settings window.
8. Click the Protocols and Ports tab.

Note: There are many applications that users do not normally see that also need to get through the Windows Firewall to access your computer. These are the network level programs that direct traffic on the network and the internet.

9. For the ICMP settings, click Customize.
10. The Customize ICMP Settings window opens. Allowing incoming echo requests is what allows network users to ping your computer to determine if it is present on the network.

List four of the Specific ICMP types.

Answers will vary. Packet Too Big, Destination Unreachable, Source Quench, Redirect, etc.

11. Close all open windows on PC-1.
12. Right-click the Cisco folder on the Desktop, then select Delete.

Reflection Question

What are some possible reasons you may need to make firewall changes?

Answers will vary.By default, most apps are blocked by Windows Firewall. You may be required to make firewall changes to allow some apps to function correctly. Other times, you might need to open a specific port to get an app to function correctly. For example, to play a multiplayer game with friends online, you might need to open a port for the game to that the firewall allows the game information to reach your PC.

• Recommend